It is currently Thu Jun 29, 2017 9:11 am




 Page 1 of 2 [ 29 posts ]  Go to page 1, 2  Next
Author Message
 Post subject: NEW internal MyIDE XL/XE/XEGS by Steven Tucker (ATARIMAX)
PostPosted: Wed Jul 18, 2007 12:23 pm 
User avatar

Joined: Sun Nov 02, 2003 8:15 am
Posts: 1230
Location: netherlands
I'm very proud to announce that Steven Tucker is continuing the internal MyIDE line.

Below you find some pictures of the proto-type I have tested.
Compatibility scores 10 out of 10 (on all IDE devices tested on XL and XE's)!
Even the SimpleTech module works great.

The FlashROM contains the standard OS for recovery function,
latest MyIDE-OS (4.3I) and BASIC/MISSILE COMMAND to support XEGS.
The flashrom is user accessable for MyIDE-upgrade and other 8k XEGS roms.

Due to the specific design and more labour, this interface is set at $59,99 (excl. postage)

Edit by classics:
XL/XE Internal kits are now in stock, you can order at:

http://www.atarimax.com/myide/

Pre-Orders for the XEGS kit can also be placed at the URL above.


Features:
1) Jumper for recovery OS (incase of bad flash).
2) Jumper for power on pin 20 (for modules and CF-card).
3) LED terminal.
4) Hookup terminal.
5) 1 Mb Flash-rom.
6) MyIDE interface.
7) GAL-interface logic
8) Quality 90° angle IDE-connector.
9) 28 pin Precision socket connector.

Kit includes:
-3 wire hookup cable + connector.
-28 pin socket.

XEGS:
This interface has a slightly different design to fit in the casing.
The GAL-interface sees the XEGS and addresses 2 extra 8k rom spaces
to include for example BASIC and MISSILE COMMAND.


Offline
 Profile  
 
 Post subject:
PostPosted: Sun Nov 18, 2007 10:29 am 
ERROR AT LINE 0
User avatar

Joined: Tue Aug 05, 2003 9:55 am
Posts: 1035
Location: Cleveland, Ohio
Here is a short video of the flash upgrading process.

Basically you just load a normal EXE/XEX/COM file containing the upgrade, either off disk or cartridge.



Offline
 Profile  
 
 Post subject:
PostPosted: Sun Nov 18, 2007 2:20 pm 
ERROR AT LINE 0
User avatar

Joined: Tue Aug 05, 2003 9:55 am
Posts: 1035
Location: Cleveland, Ohio
The MyIDE Internal flash toolkit is now available for download.

This includes a small windows application to make Atari XEX programs that will re-program your internal flash OS.

These XEX files can be loaded from any atari binary file loader like the APE Loader, Flash Cartridges and disk boot loaders.

The install also includes dos batch files that show how to make images from the command line using only the dos 'copy' command.

Image

The installer can be downloaded here:

Download MyIDE Internal Tools

If you want just the programs and batch files for making images by hand, the ZIP archive can be downloaded here:

Download MyIDE Internal Tools (ZIP Archive, No Windows Installer, No Windows Application)


Steve


Offline
 Profile  
 
 Post subject:
PostPosted: Sun Nov 18, 2007 4:37 pm 
ERROR AT LINE 0
User avatar

Joined: Tue Aug 05, 2003 9:55 am
Posts: 1035
Location: Cleveland, Ohio
Installation Guides for 65XE, 800XE, 130XE and 800XL are now available at:

http://www.atarimax.com/myide/

Please scroll down to the bottom of the page, they are in the documentation section.

Guides for 1200XL and XEGS will be available once the XEGS kits are in stock.

Steve


Offline
 Profile  
 
 Post subject:
PostPosted: Fri Dec 14, 2007 8:18 am 
User avatar

Joined: Fri Aug 29, 2003 4:37 pm
Posts: 223
Location: Arizona USA
classics wrote:
Installation Guides for 65XE, 800XE, 130XE and 800XL are now available at:

http://www.atarimax.com/myide/

Please scroll down to the bottom of the page, they are in the documentation section.

Guides for 1200XL and XEGS will be available once the XEGS kits are in stock.

Steve


Hi Steve,
I was just looking for the Guides for 1200XL and XEGS. Looking for an advanced look at what will be done..



_________________
RoyE
Offline
 Profile  
 
 Post subject:
PostPosted: Fri Jan 04, 2008 6:00 am 

Joined: Mon Jun 21, 2004 7:53 am
Posts: 325
Hi Steve-

Can you post a picture of a 1200XL/XEGS prototype? (I was thinking that I read an estimated date of 12-16?) Of course, if you don't have it, you don't have it...

-Larry


Offline
 Profile  
 
 Post subject:
PostPosted: Fri Feb 15, 2008 9:18 pm 
ERROR AT LINE 0
User avatar

Joined: Tue Aug 05, 2003 9:55 am
Posts: 1035
Location: Cleveland, Ohio
Boards have not shipped to me yet, I think it will be another week or so.

Steve


Offline
 Profile  
 
 Post subject:
PostPosted: Tue Feb 19, 2008 7:50 pm 
ERROR AT LINE 0
User avatar

Joined: Tue Aug 05, 2003 9:55 am
Posts: 1035
Location: Cleveland, Ohio
XEGS kits with flashable OS, BASIC and Missile Command rom areas are now in stock.

Ordering is available here:

http://www.atarimax.com/myide/

Thanks

Steve

Image

Image


Offline
 Profile  
 
 Post subject:
PostPosted: Wed Feb 20, 2008 8:24 am 

Joined: Mon Jun 21, 2004 7:53 am
Posts: 325
[quote="classics"]XEGS kits with flashable OS, BASIC and Missile Command rom areas are now in stock.

Ordering is available here:

http://www.atarimax.com/myide/

Thanks

Steve

Hi Steve-

That's very good news! But you don't mention 1200XL in this post. (?) Is there an issue with the 1200XL? When you get a chance, it would be useful to see a pic of the new XEGS module inserted in a 1200XL. Also, it would be good to see a pic of the two modules setting side-by-side (pin oriented, of course) to help purchasers decide which will work best for their applications. (Scrolling up/down the page isn't very helpful.)

I have my credit card out... :wink:

Thanks,
Larry


Offline
 Profile  
 
 Post subject:
PostPosted: Wed Feb 20, 2008 4:55 pm 
ERROR AT LINE 0
User avatar

Joined: Tue Aug 05, 2003 9:55 am
Posts: 1035
Location: Cleveland, Ohio
Haven't had a chance to try it in the 1200xl yet, will post more pics as soon as I can.

Steve


Offline
 Profile  
 
 Post subject: bump
PostPosted: Wed Mar 12, 2008 7:52 pm 

Joined: Thu Jan 11, 2007 1:55 pm
Posts: 2
any updates if this XEGS board will work in a 1200XL? thanks...


Offline
 Profile  
 
 Post subject:
PostPosted: Sun Apr 06, 2008 11:37 am 
ERROR AT LINE 0
User avatar

Joined: Tue Aug 05, 2003 9:55 am
Posts: 1035
Location: Cleveland, Ohio
1200xl kits have been added to the order forms.

Steve


Offline
 Profile  
 
 Post subject:
PostPosted: Tue Oct 14, 2008 10:36 pm 

Joined: Sun Dec 04, 2005 10:52 pm
Posts: 13
Location: Ottawa, Ontario
Looking at the 800xl install instructions, the photo showing the orientation of the installed board appears to be missing. I'm concerned that depending on the orientation, there may not be sufficient space inside the case for a CF card + adapter.


Offline
 Profile  
 
 Post subject: Re: NEW internal MyIDE XL/XE/XEGS by Steven Tucker (ATARIMAX
PostPosted: Wed Oct 21, 2009 12:03 am 
User avatar

Joined: Fri Aug 29, 2003 4:37 pm
Posts: 223
Location: Arizona USA
mr-atari wrote:
I'm very proud to announce that Steven Tucker is continuing the internal MyIDE line.

Below you find some pictures of the proto-type I have tested.
Compatibility scores 10 out of 10 (on all IDE devices tested on XL and XE's)!
Even the SimpleTech module works great.

The FlashROM contains the standard OS for recovery function,
latest MyIDE-OS (4.3I) and BASIC/MISSILE COMMAND to support XEGS.
The flashrom is user accessable for MyIDE-upgrade and other 8k XEGS roms.

Due to the specific design and more labour, this interface is set at $59,99 (excl. postage)

Edit by classics:
XL/XE Internal kits are now in stock, you can order at:

http://www.atarimax.com/myide/

Pre-Orders for the XEGS kit can also be placed at the URL above.


Features:
1) Jumper for recovery OS (incase of bad flash).
2) Jumper for power on pin 20 (for modules and CF-card).
3) LED terminal.
4) Hookup terminal.
5) 1 Mb Flash-rom.
6) MyIDE interface.
7) GAL-interface logic
8) Quality 90° angle IDE-connector.
9) 28 pin Precision socket connector.

Kit includes:
-3 wire hookup cable + connector.
-28 pin socket.

XEGS:
This interface has a slightly different design to fit in the casing.
The GAL-interface sees the XEGS and addresses 2 extra 8k rom spaces
to include for example BASIC and MISSILE COMMAND.


How do I use this #1 jumper? I have tried to reflash with a new file, and program crashes, flashing does not even start. I have done this once before to put River Raid in place of Missile Command. Now I want to replace River Raid and intall Xegs43i with a modified 43i with 'Hais HiSio version 1.20'. ???
TIA



_________________
RoyE
Offline
 Profile  
 
 Post subject:
PostPosted: Wed Oct 21, 2009 4:12 pm 
ERROR AT LINE 0
User avatar

Joined: Tue Aug 05, 2003 9:55 am
Posts: 1035
Location: Cleveland, Ohio
Move the jumper from the pin-20 power position (shown above) to the left so its right beside the harness.

Then start the flashing software and when prompted, remove the rescue jumper.

Steve


Offline
 Profile  
 
Display posts from previous:  Sort by  
 Page 1 of 2 [ 29 posts ]  Go to page 1, 2  Next


Who is online

Users browsing this forum: No registered users and 4 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  

cron