It is currently Sun Dec 17, 2017 10:04 pm




 Page 1 of 1 [ 5 posts ] 
Author Message
 Post subject: MyIDE][ with XEGS
PostPosted: Sat Mar 11, 2017 11:37 pm 

Joined: Sat Apr 09, 2016 8:43 pm
Posts: 2
ok, I have an XEGS and the MyIDE][ (and lost documentation, such as it was). Here are a couple of questions:

- How does Max Flash Studio work with it? I tried running it, but it says i need to hook up the programmer (I'm assuming cart). No USB on the cart.
- How do I load my cart images to the compactflash, Since the XEGS is XL/XE compatible?
- I see there is an update file for it. How do I get it to the cart?


Offline
 Profile  
 
 Post subject: Re: MyIDE][ with XEGS
PostPosted: Sun Mar 12, 2017 2:20 am 
User avatar

Joined: Sun Nov 02, 2003 8:15 am
Posts: 1258
Location: netherlands
You need the USB-programmer if you want to program from the PC.

No USB-programmer:
Export your work as BIN for MyIDE-][
Put that file on your CF-card.
Boot the Atari, load the FATloader.
Select this file you made.
Press CNTRL-F.

This will Load,check,erase and program the flash-content.

YOU MUST INCLUDE THE FATLOADER IN YOUR NEW CONTENT.
IF NOT, YOU WILL NEVER BE ABLE TO RE-PROGRAM......
! BE SURE YOU EXPORT FOR MYIDE-][ !

Success,
Sijmen.


Offline
 Profile  
 
 Post subject: Re: MyIDE][ with XEGS
PostPosted: Sun Mar 12, 2017 11:27 am 
User avatar

Joined: Sun Nov 02, 2003 8:15 am
Posts: 1258
Location: netherlands
Perhaps I read your post wrongly.

Rom images you can load with the fatloader.

If you want to customize your flashcontent,
you need the studio software I mentioned above.
Without the programmer, you can export the bin-file.
As I said above. But be careful what do.

I would suggest to upgrade to 4.9.B16 first.


Offline
 Profile  
 
 Post subject: Re: MyIDE][ with XEGS
PostPosted: Sun Mar 12, 2017 2:13 pm 

Joined: Sat Apr 09, 2016 8:43 pm
Posts: 2
- USB programmer is...? Is it the cart hooked up to the pc, which is not in MyIDE][?
- My XEGS does not have a keyboard. No Ctrl-F
- Again, how do I load the update into the MaxFlash Studio. It's REQUIRING the usb programmer.

Forgive the newbie stuff, I just want to make sure what I'm getting into. Most ROM carts you just load with roms.


mr-atari wrote:
You need the USB-programmer if you want to program from the PC.

No USB-programmer:
Export your work as BIN for MyIDE-][
Put that file on your CF-card.
Boot the Atari, load the FATloader.
Select this file you made.
Press CNTRL-F.

This will Load,check,erase and program the flash-content.

YOU MUST INCLUDE THE FATLOADER IN YOUR NEW CONTENT.
IF NOT, YOU WILL NEVER BE ABLE TO RE-PROGRAM......
! BE SURE YOU EXPORT FOR MYIDE-][ !

Success,
Sijmen.


Offline
 Profile  
 
 Post subject: Re: MyIDE][ with XEGS
PostPosted: Mon Mar 13, 2017 2:58 am 
User avatar

Joined: Sun Nov 02, 2003 8:15 am
Posts: 1258
Location: netherlands
The USB-programmer is another device.
Check the atarimax homepage, it's in the 1mb and 8mb flashcartridge section.
Oh, they are also on the MyIDE-][ page.
Price is 60 USD I see.

Looks like a cartridge but is not the same as MyIDE-][

No keyboard, no chance of re-programming the cartridge with the fatloader.
Sorry.

Also you do not need to upgrade to 4.9.B16 either.
It's a new BIOS, but also require the keyboard....

Grtz,
Sijmen.


Offline
 Profile  
 
Display posts from previous:  Sort by  
 Page 1 of 1 [ 5 posts ] 


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  

cron