On my homepage, you find this.
Please consult the read-me/txt files.

My main goal was to support MyIDE-partitions without an OS that occupies 16k RAM or the need of modding your Atari with a custom OS.

Supported:
SHIFT+CONTROL hotkeys: RIPM, numbers, ESC (reset), TAB (restart), CAPS (reboot)
MyIDE-images and -partitions

It is a completely different way to catch IO and patch this to CF-access.
The main core runs from MyIDE-][-SRAM, thus has almost zero footprint of Atari-RAM usage.
Therefore Turbo_BASIC and other games/programs (like RED MAX) will load/run fine.
-yeay-

Compatibility is relative high and runs on any Atari 400/800 or XL/XE with stock ATARI-OS.
During boot-up, you can use the MyIDE-MENU to manage your partitions or IMAGE-MENU to select an image.
When you have updated the MyIDE-][ content, you can also select languages at slots 13,14 or 15

http://www.mr-atari.com/Mr.Atari/MyIDE-ONLY/

Thank you so much for doing this. It allows me to run Turbo Basic XL or compiled TBXL programs while still not modifying my Atari with MyBIOS in ROM.

Bob C

Version #6 now online.

#6
Fixed, 1200XL rev.11 bootup failure.
Changed, upgraded ATBasic to 1.55

How about this update:
It was a lot of work, but I'm happy with the result.


#7
Added, 600XL (16k) support.
Added, 400/800 (8k modules, upto 48k) support.
Added, 1200XL rev.10 support.
Added, 8k cartridges from flash support.
(Atari Basic Rev.C / Assembler editor / Altirra Basic)
Changed, (c) mr.atari 2018
Changed, upgraded to include latest shipping firmware.

Tested on Altirra 3.00 and real hardware "600XL", "800XL" and "800XL in 48k 400/800 configuration".
For as I can see now, it does the trick.
If you find issues, please be so kind and drop me a pm or email.

To work on the 400/800, you need to change the cartridge-slot internally.
MyIDE-][ does not work without the PHI2-signal.
Pin "S" has RAS connected and needs PHI2
Its an easy fix, see here:
https://www.wudsn.com/index.php/product ... ri-800-fix