|
It is currently Thu Mar 28, 2024 6:39 am
|
View unanswered posts | View active topics
|
|
|
|
Author |
Message |
rubber_jonnie
|
Post subject: Flashing of MyIDE v1 - firmware download links please. Posted: Thu Jul 02, 2015 12:05 pm |
Joined: Sat Mar 03, 2007 8:38 am Posts: 10
|
Forgive me for dredging up something that has probably been asked a million times already, but I have now spent several hours digging through the forum, and the heat in my retro room has become so unbearable, that I need to vacate to a cooler room!
I have a simple question: Where are the links to the MyIDE+Flash updates please?
Since moving house, I am lucky enough to have a retro space, and I'm digging out my old 8 bit Ataris, and the firmware on my MyIDE+Flash is 03-Feb-06.
I'm guessing a later version exists, and can be flashed via an ATR image on my 800XL with via APE and my SIO2PC adapter, but I am damned if I can find any links here to any firmware.
Please can somebody point me in the right direction.
Thanks in advance.
_________________ Atari 800XL with APE warp 32 in 1 board Atari 65 XE Atari 1050 with Happy upgrade APE + serial SIO2PC MyIDE 1 XC12 and 1010 tape drives Atari 4160 STE with dual internal IDE Atari 520STFM Atari 7800 Prosystem Atari 2600 Jr
|
|
|
|
|
rubber_jonnie
|
Post subject: Re: Flashing of MyIDE v1 - firmware download links please. Posted: Thu Jul 02, 2015 6:03 pm |
Joined: Sat Mar 03, 2007 8:38 am Posts: 10
|
So, a bit more digging after cooling down, and I got to this page: viewtopic.php?f=7&t=357I'll give it a whirl and report back.
_________________ Atari 800XL with APE warp 32 in 1 board Atari 65 XE Atari 1050 with Happy upgrade APE + serial SIO2PC MyIDE 1 XC12 and 1010 tape drives Atari 4160 STE with dual internal IDE Atari 520STFM Atari 7800 Prosystem Atari 2600 Jr
|
|
|
|
|
mr-atari
|
Post subject: Re: Flashing of MyIDE v1 - firmware download links please. Posted: Fri Jul 03, 2015 3:11 am |
Joined: Sun Nov 02, 2003 8:15 am Posts: 1549 Location: netherlands
|
There are also 2 newer firmwares called 4.9.xx -05, the last release: viewtopic.php?p=7346#p7346and -0A, the last beta: viewtopic.php?p=9043#p9043Important note: The -0A version from the download is already crced, so you can add it as-is (packed bios) to your cartridge. I suggest you try the -0A version, that seems the best version among all. After these, I'm switched to MyIDE-][ completely.
|
|
|
|
|
rubber_jonnie
|
Post subject: Re: Flashing of MyIDE v1 - firmware download links please. Posted: Fri Jul 03, 2015 8:20 am |
Joined: Sat Mar 03, 2007 8:38 am Posts: 10
|
Thanks Mr A, I will visit those links and download. Since I have SIO2PC and APE set up, I may just stick with the MyIDE 1, as the Atari is sat next to the PC running APE, though you never know since I have several 8 Bits to play with. Thanks for your continued devotion to the Atari 8Bit
_________________ Atari 800XL with APE warp 32 in 1 board Atari 65 XE Atari 1050 with Happy upgrade APE + serial SIO2PC MyIDE 1 XC12 and 1010 tape drives Atari 4160 STE with dual internal IDE Atari 520STFM Atari 7800 Prosystem Atari 2600 Jr
|
|
|
|
|
rubber_jonnie
|
Post subject: Re: Flashing of MyIDE v1 - firmware download links please. Posted: Fri Jul 03, 2015 9:33 am |
Joined: Sat Mar 03, 2007 8:38 am Posts: 10
|
Mr A
Quick question, is there an ATR image for flashing the 0A version at all?
The ATR image I downloaded of 3.5 installed no bother at all, and doing it over SIO2PC was simple, but I don't own a MaxFlash adapter at present, and I'm a little reluctant to spend nearly $70 for something I won't use much beyond this one flash.
If not I'll look to use the 05 version, thanks.
_________________ Atari 800XL with APE warp 32 in 1 board Atari 65 XE Atari 1050 with Happy upgrade APE + serial SIO2PC MyIDE 1 XC12 and 1010 tape drives Atari 4160 STE with dual internal IDE Atari 520STFM Atari 7800 Prosystem Atari 2600 Jr
|
|
|
|
|
mr-atari
|
Post subject: Re: Flashing of MyIDE v1 - firmware download links please. Posted: Sun Jul 05, 2015 1:48 am |
Joined: Sun Nov 02, 2003 8:15 am Posts: 1549 Location: netherlands
|
No, but you can create your own flasher ATR with the ATARIMAX-studio. Just create a flash content to your liking, add the MyBIOS-FE.ROM as packed BIOS. Then export ATR and use that. Easy, not? Later, Sijmen.
|
|
|
|
|
rubber_jonnie
|
Post subject: Re: Flashing of MyIDE v1 - firmware download links please. Posted: Sun Jul 05, 2015 5:56 pm |
Joined: Sat Mar 03, 2007 8:38 am Posts: 10
|
Thanks for the assistance Sijmen, I really appreciate it.
I just created an ATR and tested with Altirra and it boots fine and detects the 'Cartridge' installed, though for obvious reasons, it won't flash!
I'll try it on the real thing at a sensible time of day, as I need to go to sleep now as back to work in the morning.
If it works, I will upload the ATR here for others to use if you have no objections.
Regards
Jon
_________________ Atari 800XL with APE warp 32 in 1 board Atari 65 XE Atari 1050 with Happy upgrade APE + serial SIO2PC MyIDE 1 XC12 and 1010 tape drives Atari 4160 STE with dual internal IDE Atari 520STFM Atari 7800 Prosystem Atari 2600 Jr
|
|
|
|
|
rubber_jonnie
|
Post subject: Re: Flashing of MyIDE v1 - firmware download links please. Posted: Mon Jul 06, 2015 4:57 pm |
Joined: Sat Mar 03, 2007 8:38 am Posts: 10
|
Hi Sijmen
So I flashed using the ATR I created, is it correct that the cart will now boot to a menu from where I can select My-IDE? Looking at other workbooks on the forum, this seems to be correct, but I would like to verify please.
I did only add the packed ROM though, should I have also loaded another game ROM or two with it to make MY-IDE auto start as per version 3.5, or I have I hit the right note with what I've done?
Thanks for all your guidance on this, I appreciate the help.
If I've done the correctly, then I will upload the ATR images for both the 05 and 0A versions.
_________________ Atari 800XL with APE warp 32 in 1 board Atari 65 XE Atari 1050 with Happy upgrade APE + serial SIO2PC MyIDE 1 XC12 and 1010 tape drives Atari 4160 STE with dual internal IDE Atari 520STFM Atari 7800 Prosystem Atari 2600 Jr
|
|
|
|
|
mr-atari
|
Post subject: Re: Flashing of MyIDE v1 - firmware download links please. Posted: Tue Jul 07, 2015 4:08 am |
Joined: Sun Nov 02, 2003 8:15 am Posts: 1549 Location: netherlands
|
Yep, you are spot on.
You have 88k left, so let yourself go. I normally put on some favorite games (xex or 8k roms), assembler, basic rev-c, altirra basic.
When you want to use the MyBIOS, yes you have to select it from the menu. Afterwards, you can always go back with SHIFT and select a language-rom from your menu.
Enjoy, Sijmen.
|
|
|
|
|
rubber_jonnie
|
Post subject: Re: Flashing of MyIDE v1 - firmware download links please. Posted: Tue Jul 07, 2015 6:43 am |
Joined: Sat Mar 03, 2007 8:38 am Posts: 10
|
Cool, thanks again for the help Sijmen
_________________ Atari 800XL with APE warp 32 in 1 board Atari 65 XE Atari 1050 with Happy upgrade APE + serial SIO2PC MyIDE 1 XC12 and 1010 tape drives Atari 4160 STE with dual internal IDE Atari 520STFM Atari 7800 Prosystem Atari 2600 Jr
|
|
|
|
|
|
|
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
|
|