It is currently Sat Sep 22, 2018 10:21 pm

All times are UTC - 5 hours




 Page 1 of 1 [ 7 posts ] 
Author Message
 Post subject: RESET button on ATARIMAX Cartridges
PostPosted: Sat Dec 09, 2017 2:22 pm 

Joined: Wed May 31, 2017 12:19 am
Posts: 20
Just a question: Why the Flash and MyIDE II cartridges do not have a RESET button? To use switch on the back of ATARI to reset an unstoppable application is not a smart approach. I have other (25+ years old) cartridges, like for example ToolBOX2 from JRC Software, which came with convenience reset button on the top. Using that cartridges is easy without turning off ATARI if I want to run different application. Usually I am using this cartridge with SIO2PC USB version also.
I push the button on the top of cartridge, start TTDOS or/(and from TTDOS) TT-BASIC 2.12 where I apply BYE and ATARI's RESET button; If I use MyIDE II I miss that option and after crushing an application I should always shut down ATARI and turn on again with its switch ... It is not a nice way (ICs' repeated powering off/on and the mechanical switch also).

Thanks,
Peter


There are images and/or files attached to this posting. You must be logged-in to view or download this content.


Offline
 Profile  
 
 Post subject: Re: RESET button on ATARIMAX Cartridges
PostPosted: Sun Dec 10, 2017 2:15 am 
User avatar

Joined: Sun Nov 02, 2003 8:15 am
Posts: 1317
Location: netherlands
Its optional on MyIDE-][ ;-)


There are images and/or files attached to this posting. You must be logged-in to view or download this content.


Offline
 Profile  
 
 Post subject: Re: RESET button on ATARIMAX Cartridges
PostPosted: Sun Dec 10, 2017 1:31 pm 

Joined: Wed May 31, 2017 12:19 am
Posts: 20
Thanks :? . It should be there, very useful. I am surprised a little, why it missing on final product. You can save lots of time and - of course - protects ATARI from some damages.

Peter


Offline
 Profile  
 
 Post subject: Re: RESET button on ATARIMAX Cartridges
PostPosted: Sun Dec 10, 2017 3:15 pm 

Joined: Wed May 31, 2017 12:19 am
Posts: 20
Hi Sijmen,

I posted a question also about the MyIDE II, but no one answered me on it right now.
If I may ask you to help me. How to extract files from the 512kB flash memory? I would like to have Assembler Editor from it and put it on HD. What version I have, it has missing instructions or its features are different from that, what is in the flash memory. Concretely I can point on DR instruction in DEBUG section. I flash version it follows the book description, what I have on HD, it shows only A register. Also, how can I include other asm files into the editor, so chain number of asm files without rewriting them in the Editor. The Assembler Editor has a built in text editor, similar to ATARI Basic edtitor. It is very convenient solution, what I miss in MAC/65 (it is using external text editor: MEDIT - what is terrible an one).

Thanks,
Peter


Offline
 Profile  
 
 Post subject: Re: RESET button on ATARIMAX Cartridges
PostPosted: Sun Dec 10, 2017 4:03 pm 

Joined: Wed May 31, 2017 12:19 am
Posts: 20
The other nice example of resetable cartridge. :) QMEG ... etc.
Peter


There are images and/or files attached to this posting. You must be logged-in to view or download this content.


Offline
 Profile  
 
 Post subject: Re: RESET button on ATARIMAX Cartridges
PostPosted: Mon Dec 11, 2017 3:42 am 
User avatar

Joined: Sun Nov 02, 2003 8:15 am
Posts: 1317
Location: netherlands
pkapas wrote:
Hi Sijmen,

I posted a question also about the MyIDE II, but no one answered me on it right now.
If I may ask you to help me. How to extract files from the 512kB flash memory? I would like to have Assembler Editor from it and put it on HD. What version I have, it has missing instructions or its features are different from that, what is in the flash memory. Concretely I can point on DR instruction in DEBUG section. I flash version it follows the book description, what I have on HD, it shows only A register. Also, how can I include other asm files into the editor, so chain number of asm files without rewriting them in the Editor. The Assembler Editor has a built in text editor, similar to ATARI Basic edtitor. It is very convenient solution, what I miss in MAC/65 (it is using external text editor: MEDIT - what is terrible an one).

Thanks,
Peter


I did reply/answer.....
For MyIDE-][ posts, you should go to the correct forum.
That is the right thing to do.

Look here, I'm sure you can find something here you like.
http://www.atarimania.com/pgemainsoft.a ... U&system=8


Offline
 Profile  
 
 Post subject: Re: RESET button on ATARIMAX Cartridges
PostPosted: Mon Dec 11, 2017 11:33 am 

Joined: Wed May 31, 2017 12:19 am
Posts: 20
Thanks, I found it. I forgot to check notification on that.
Have a nice day,
Peter


Offline
 Profile  
 
Display posts from previous:  Sort by  
 Page 1 of 1 [ 7 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 3 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to: