|
It is currently Thu Mar 28, 2024 3:20 am
|
View unanswered posts | View active topics
|
|
|
|
Author |
Message |
dcampos
|
Post subject: MyIDE+Flash recovery after bad flashing! Posted: Sat Jul 28, 2012 8:40 am |
Joined: Tue May 01, 2012 6:18 pm Posts: 8
|
Hello, I just tried to update Atarimax MyIDE+Flash cart with the image present on this site : http://www.atari8.co.uk/myide/And now MyIDE cart is pretty much dead. There is anyform that I can reflash the cart externally (using a jtag cable) ? Just to know, I don't have any disk drive or other Atari peripheral. Any help will be greatly appreciated! Thanks, Daniel
|
|
|
|
|
phsstpok
|
Post subject: Re: MyIDE+Flash recovery after bad flashing! Posted: Sun Jul 29, 2012 10:15 am |
Joined: Sat Oct 29, 2005 9:54 pm Posts: 65
|
|
|
|
|
dcampos
|
Post subject: Re: MyIDE+Flash recovery after bad flashing! Posted: Mon Jul 30, 2012 8:13 pm |
Joined: Tue May 01, 2012 6:18 pm Posts: 8
|
|
|
|
|
mr-atari
|
Post subject: Re: MyIDE+Flash recovery after bad flashing! Posted: Wed Aug 01, 2012 8:15 am |
Joined: Sun Nov 02, 2003 8:15 am Posts: 1549 Location: netherlands
|
Hi daniel,
How did you flash to SDX then? Do you have the 128k eeprom file? Or you can upgrade to the latest 4.7 MyBIOS here on the forum too.
Later, Sijmen.
BTW the SDX445 should work, only some problems with stock atari /w only 64k and running the APT-software to configure your IDE-device.
|
|
|
|
|
dcampos
|
Post subject: Re: MyIDE+Flash recovery after bad flashing! Posted: Wed Aug 01, 2012 7:42 pm |
Joined: Tue May 01, 2012 6:18 pm Posts: 8
|
mr-atari wrote: Hi daniel,
How did you flash to SDX then? Do you have the 128k eeprom file? Or you can upgrade to the latest 4.7 MyBIOS here on the forum too.
Later, Sijmen.
BTW the SDX445 should work, only some problems with stock atari /w only 64k and running the APT-software to configure your IDE-device. I flashed in the same way that I flashed the 4.7 MyBios. I placed the .ATR file inside one of the "image" slots on the CF card using the "MyIDE Drive Manager" (excelent tool). For MyBios it worked flawlessly, but for the SDX445 .ATR image it failed. Steve already sent me the raw file for the original 3.5 and I will flash using a friend's eeprom programmer. Just finnishing to adapt a PLCC-32 socket to a DIP-32 socket for use in the eeprom programmer... Regards, Daniel
|
|
|
|
|
mr-atari
|
Post subject: Re: MyIDE+Flash recovery after bad flashing! Posted: Thu Aug 02, 2012 2:38 am |
Joined: Sun Nov 02, 2003 8:15 am Posts: 1549 Location: netherlands
|
The original BIN file is also in the topic about 3.5F Yeah, the only safe way to flash from image-space is when you go from MyBIOS to MyBIOS. No idea how SDX behaves and perhaps premature shuts-down the IDE-port while flashing the chip. Succes and let me know how it goes further. Sijmen.
|
|
|
|
|
dcampos
|
Post subject: Re: MyIDE+Flash recovery after bad flashing! Posted: Sat Aug 04, 2012 6:23 pm |
Joined: Tue May 01, 2012 6:18 pm Posts: 8
|
Just to let you know..
I just reflashed the flash memory using a EPROM Programmer of a friend. The most boring part was to make a PLCC-32 to DIP-32 adapter to use it in the Programmer. Reflashed to 3.5 and soon after updated again to MyBIOS 4.7. SIDE Loader rocks a lot!
Quick question: Anyone knows why Gyruss did't work loading from the SIDE Loader on the MyIDE ? Tried 3 different versions but no one worked.
Thanks!
Daniel
|
|
|
|
|
roye
|
Post subject: Re: MyIDE+Flash recovery after bad flashing! Posted: Sat Aug 04, 2012 9:29 pm |
Joined: Fri Aug 29, 2003 4:37 pm Posts: 230 Location: Arizona USA
|
No guarantee but Draco30 redid Gyruss recently at this site: http://drac030.krap.pl/en-fixes.phpHope it works for you but I don't have problems with the orignal file. Of course I don't play Gyruss very often.
_________________ Roydea6
|
|
|
|
|
mr-atari
|
Post subject: Re: MyIDE+Flash recovery after bad flashing! Posted: Mon Aug 06, 2012 2:02 am |
Joined: Sun Nov 02, 2003 8:15 am Posts: 1549 Location: netherlands
|
dcampos wrote: Quick question: Anyone knows why Gyruss did't work loading from the SIDE Loader on the MyIDE ? Tried 3 different versions but no one worked.
Hmmm, good question, I'll put this on my to-do list. Not sure anymore, but I think I had to include some patches in MyBIOS to make Gyruss load from an image-slot. Since SIDE is 3rd party I do not know, but I can use altirra to debug Later, Sijmen
|
|
|
|
|
dcampos
|
Post subject: Re: MyIDE+Flash recovery after bad flashing! Posted: Mon Aug 06, 2012 1:51 pm |
Joined: Tue May 01, 2012 6:18 pm Posts: 8
|
roye wrote: No guarantee but Draco30 redid Gyruss recently at this site: http://drac030.krap.pl/en-fixes.phpHope it works for you but I don't have problems with the orignal file. Of course I don't play Gyruss very often. Thanks! This version was ok to run through SIDE Loader. mr-atari wrote: dcampos wrote: Quick question: Anyone knows why Gyruss did't work loading from the SIDE Loader on the MyIDE ? Tried 3 different versions but no one worked.
Hmmm, good question, I'll put this on my to-do list. Not sure anymore, but I think I had to include some patches in MyBIOS to make Gyruss load from an image-slot. Since SIDE is 3rd party I do not know, but I can use altirra to debug Later, Sijmen No need. It appears that the problem was in the images available on the net. I tried Draco30 version and it worked like a charm on the SIDE Loader. By the way, this SIDE Loader was an excelent addition to MyBIOS! Straightforward and easy to use! Thanks! Daniel
|
|
|
|
|
mr-atari
|
Post subject: Re: MyIDE+Flash recovery after bad flashing! Posted: Wed Aug 08, 2012 12:09 pm |
Joined: Sun Nov 02, 2003 8:15 am Posts: 1549 Location: netherlands
|
dcampos wrote: By the way, this SIDE Loader was an excelent addition to MyBIOS! Straightforward and easy to use!
Thanks, but the credits should go to "Candle". I only used his ROM-image with permission and changed the boot-code to work with ATARIMAX+1Mb+IDE Cheers, Sijmen.
|
|
|
|
|
|
|
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
|
|