|The Atari SIG Historical Archive|
|Created and hosted by: atarimax.com|
|[ HOME | GO ATARI | 8-BIT | ST/TT | PORTFOLIO | LYNX | JAGUAR | LIBRARY ]|
Article #239 (730 is last): Newsgroups: freenet.sci.comp.atari.mags From: aj434@cleveland.Freenet.Edu (Bruce D. Nelson) Subject: ST Report: 14-Feb-92 #807 Posted-By: xx004 (aa400 - John J. Lehett) Reply-To: aj434@cleveland.Freenet.Edu (Bruce D. Nelson) Date: Sun Feb 16 16:41:07 1992 *---== ST REPORT INTERNATIONAL ONLINE MAGAZINE ==---* """"""""""""""""""""""""""""""""""""""" "The Original 16/32bit Online Magazine" from STR Publishing """""""""""""" February 14, 1992 No.8.07 ========================================================================== STReport International Online Magazine Post Office Box 6672 Jacksonville, Florida 32205 ~ 6672 R.F. Mariano Publisher - Editor ----------------------------------------- Voice: 904-783-3319 10 AM - 4 PM EST BBS: 904-786-4176 USR/HST DUAL STANDARD 1200 - 19.2bps V.32 - 42 FAX: 904-783-3319 12 AM - 6 AM EST ----------------------------------------- FNET 0350 - STR S-East: The Bounty **
** 1-904-786-4176 FNET 0489 - STR N-East: Steal Your Face BBS 1-908-920-7981 FNET 0075 - STR West: Bloom County BBS 1-415-965-9347 FNET 0018 - STR Canada: ///Turbo Board BBS Support 1-416-274-1225 FNET 1031 - STR Europe: <<< INTERNET - UK>>> 011-44-296-395-935 __________________________________________________________________ > 02/14/92: STReport #8.07 "Reporting ABOUT Atari not FOR Atari!" ------------------------- - The Editor's Desk - CPU REPORT - CODEHEAD CONF - APPLE SUES MSOFT! - FLASH 2 CLOSE! - MegaPaint Review - SUPER PS OFFERED - EASY DATABASE - TAF SHOW NEWS - PORTFOLIO NEWS - SST SHIPPING! - STR Confidential -* GRUNKE HIGHLY SUCCESSFUL! *- -* PORTFOLIO IN LAW ENFORCEMENT! *- -* SPECIAL CODEHEAD TEC OFFER! *- ========================================================================== ST REPORT INTERNATIONAL ONLINE MAGAZINE The _Number One_ & Original 16/32 bit Online Magazine -* FEATURING WEEKLY *- "UP-TO-DATE News and Information" Current Events, Original Articles, Tips, Rumors, and Information Hardware - Software - Corporate - R & D - Imports ========================================================================== STReport's support BBS, NODE 350, invites BBS systems, worldwide, to participate in the Fido/F-Net Mail Network. Or, call Node 350 direct at 904-786-4176, and enjoy the excitement of exchanging information relative to the Atari ST computer arena through an excellent International ST Mail Network. All registered F-NET - Crossnet SysOps are welcome to join the STReport Crossnet Conference. The Crossnet Conference Code is #34813, and the "Lead Node" is # 350. All systems are welcome and invited to actively participate. Support Atari Computers; Join Today! ========================================================================== AVAILABLE EXCLUSIVELY ON: GENIE ~ CIS ~ DELPHI ~ BIX ~ FIDO ~ F-NET ========================================================================== COMPUSERVE WILL PRESENT $15.00 WORTH OF COMPLIMENTARY ONLINE TIME to the Readers of; ST REPORT INTERNATIONAL ONLINE MAGAZINE """"""""""""""""""""""""""""""""""""""" "The Original 16/32bit Online Magazine" NEW USERS; SIGN UP TODAY! CALL: 1-800-848-8199 .. Ask for operator 198 You will receive your complimentary time and be online in no time at all! WHAT'S NEW IN THE ATARI FORUMS (February 14) ============================================ ***** HAPPY VALENTINE'S DAY! ***** VENDOR DIRECTORY NOW AVAILABLE! """"""""""""""""""""""""""""""" Thanks to the programming expertise of our own Bill Aycock, the Atari Forum staff are pleased to announce the availablity of our VENDOR accessory datafile. Download file VENDOR.ARC from LIBRARY 6 of the Atari Productivity Forum (GO ATARIPRO). This package contains a desk accessory/program (just rename it appropriately) VENDOR.ACC which accesses a standardized format datafile named VENDOR.DAT. With this program you can have instant access to the names, addresses, phone numbers, CompuServe User IDs, and some product names for vendors that support/service the Atari computer community. The Atari Forum staff pledges to update and expand the info in VENDOR.DAT on a regular basis. The sysops have found this accessory to be handy in our job of answering user queries and now we'd like to share it with the rest of the Atari community. A little Valentine's gift from the Atari Forum staff... to our wonderful members. ATARI FORUMS EXPAND LYNX COVERAGE In response to the increased sales of Atari's LYNX, the first handheld 8-bit videogame unit with a color LCD screen, multiplayer capabilities and stereo sound, the staff of the Atari 8-Bit Forum has recruited the services of two well - known LYNX gaming experts, Jeff Kovach and Todd Ellering. A new library devoted ONLY to LYNX files will include game maps in GIF graphics format, help and hint files, and press releases detailing new game introductions. Kovach and Ellering will be online daily to answer LYNX questions and will host special conferences with playing tips. For more information, GO ATARI8. NEW FROM ATARI! Atari has uploaded the latest version of their Hard Drive Utilities! Look for ATHDX5.LZH in Library 4 ("Utilities") in the Atari Productivity Forum (GO ATARIPRO) for version 5.0 of these utilities. COUNT DOWN TO THE PORT-A-THON! One week to the 24-hour online PORT-A-THON..... Will we be giving out software prizes? Yes -- the latest releases! You want to win a PC CARD DRIVE or 128k RAM card? Yes, we have those too! You want to win CompuServe gift certificates? Of course! But you must log on during the marathon to win! We have dozens of hardware and software prizes and HUNDREDS of discount certificates to give away to participants. How difficult is it to win?? (Hint: Can you roll a pair of dice????) The PORT-A-THON starts Friday, Feb 21 at 2pm EST and ends Saturday, Feb 22nd at approx 2pm EST. BE THERE !!! THE ATARI PORTFOLIO FORUM ON COMPUSERVE HAS BEEN DESIGNATED AN OFFICIAL SUPPORT SITE BY ATARI CORPORATION "GO APORTFOLIO TO ACCESS THE ATARI PORTFOLIO FORUM" *********************************************************************** > CPU STATUS REPORT LATE BREAKING INDUSTRY-WIDE NEWS ================= Issue #07 Compiled by: Lloyd E. Pulley, Sr. -- BBS Sysops in Kansas Near Agreement A dispute between Southwestern Bell and operators of computer bulletin board systems (BBS) in Kansas City concerning a new tariff plan that forces BBSes to pay business rates could soon be settled. The attorney representing the BBS sysops said the agreement in the works calls for BBSes to be exempt from business rates if they meet certain conditions. One is that the boards must be located in residences. Exem- pted BBSes also must not charge for access, must not advertise and must have fewer than five phone lines. The last stumbling block in the agreement is coming up with a workable definition for "BBS" for the tariff language. -- Man Shoots Son's Computer Charles R. Hubbard, a 44-year-old resident of Spokane, Washington has been arrested for investigation of assault after he reportedly fired seven shots into his son's personal computer. Hubbard was released after posting $20,000 bail. According to reports, Hubbard was irritated by the amount of time his son spent using" the PC and "appeared to be upset because his son was unemployed and all he did was mess with that -- quote -- 'stupid' computer." The assault charge was for allegedly pointing a .45-caliber semi- automatic handgun at his son. -- Apple Sues Microsoft for $4.3 Billion Accusing Microsoft Corp. of infringing on its copyrights for the Apple Macintosh user interface, Apple Computer Inc. says it believe it is en- titled to $4.365 billion in damages from Microsoft. Microsoft claims that none of its Windows programs infringes on Apple copyrights, calling the damage amount "insupportable and speculative" and is attempting to get a dismissal of the almost 4 year old infringe- ment suit. -- William Hewlett Elected to Inventors Hall of Fame In recognition for his invention of the variable frequency oscillation generator, William R. Hewlett, co-founder of Hewlett-Packard Co., was elected this week into the National Inventors Hall of Fame and will take his place alongside the likes of Thomas Edison, Guglielmo Marconi, George Washington Carver and Gertrude Elion. Hewlett's invention was the first practical method of generating high- quality audio frequencies needed in communications, geophysics, medicine and defense work. Eight of the machines were used to create the 1939 soundtrack of "Fantasia." Born in 1918, Hewlett is now director emeritus for HP's board of directors. -- National Semi-Processor Used In Fast Toshiba Laser Printer National Semiconductor has announced that its NS32GX32 32-bit embedded printer microprocessor has been incorporated into Toshiba's 300 dots- per-inch, 17-page-per-minute laser printer which is geared toward the corporate market. National Semiconductor describes the GX32 processor as specifically designed for computation-intensive applications and one that performs at three to 10 million instructions-per-second (MIPS). -- Wordperfect Expects 20% Revenue Jump Wordperfect Corporation says it expects 1992 revenues to be up about 20% over 1991 and its 1993 revenues to jump 40%. Much of this increase will be due to the introduction of a new generation of its word processing program, Wordperfect. According to company president Pete Peterson, the introduction of WP for Windows helped the '91 results. The company said that it had shipped more than 600,000 copies of WP for Windows by the end of January. In addition to WP for Windows, the company says it ships about 150,000 WP DOS packages every month. Some of the reasons accredited to Wordperfect's success is the ability to move from one platform to another without having to buy all new Wordperfect programs. A company upgrading their DOS machines to Windows can upgrade for around $50 per upgraded machine rather than the $495 cost of a new Wordperfect package. This was possible because the user already is licensed to use Wordperfect on the DOS-based machines. Wordperfect also allows users to have a copy of Wordperfect loaded on two machines simultaneously, such as one office and one home or laptop machine, without having to buy two copies. The only stipulation is that both copies are not being used simultaneously. -- Apple Canada Cuts Mac Prices Vowing to continuing an aggressive pricing strategy, while at the same time admitting to being disappointed in the sales of the Macintosh Classic II, Apple Canada has announced price cuts on three low-end models, the Classic, Classic II and LC. Apple's representatives cited company policy and would not comment on rumors that two of the models might be nearing the end of their lives, that Apple plans to discontinue all computers using the Motorola 68000 processor within the next couple of months. -- Lotus Appoints Full-Time Copy Protection Chief Claiming the first full-time appointment of its kind, Lotus Development Europe has appointed Harry Mallinson a full-time director of copyright protection. Lotus figures that up to 50% of its users worldwide are using pirated copies of the company's software. There are fourteen million users of 1-2-3 world-wide, accounting for lost revenues running into the billions of dollars. According to Mallinson, "As an industry, we were slow to see the long- term damage to software developers of allowing copying to take place. Copy protection on disks curbed piracy in the mid-1980s but customers were unhappy with this and the protection was removed,". "The problem is that nothing since has been so effective. That's why we're now focusing on making users more aware of the law," he added. Mallinson added, "There's little doubt in my mind that copyright protection will become of *the* key issues for software developers this decade,". -- Cray Computer Cuts Back Development plans for a new supercomputer have been scaled back at Cray Computer Corp. after the young firm lost its lone customer, Lawrence Livermore National Laboratories. The Colorado Springs, Colo., company says it has started searching for a business partner. Lawrence Livermore decided to discontinue its business ties with Cray Computer after the company missed an important Dec. 9 demonstration deadline for its Cray-3 system. The lab then decided to buy a similar computer from Cray Computer's former parent and chief competitor, Cray Research Inc. -- Electronic Arts 2 For 1 Stock Split Electronic Arts has announced its board of directors has approved a two for one stock split of its common stock as of March 16, 1992. The com- pany said that each shareholder of record will receive one share of stock for each share held on March 16, to be distributed on April 6, 1992. -- Zenith Cuts Prices 5-26% Zenith Data Systems has announced prices of 5-26% on 18 of its PCs. The cuts on two notebook computers, the MastersPort 386SL and MastersPort 386SLe, amounted to $1,050 and $1,000, respectively, reducing the probable retail price to under $3,000. -- AST Cuts Prices 18-31% AST Research Inc. has cut prices on several models of its Premium II 486/33 and 486/33E computers by 18-31%. -- Everex Cuts Prices up to 32% Citing lower manufacturing costs, Everex Systems Inc. has announced im- mediate price cuts of up to 32% on its STEP and Tempo 486DX PCs. *********************************************************************** :HOW TO GET YOUR OWN GENIE ACCOUNT: _________________________________ To sign up for GEnie service: Set your communications software to Half Duplex (or Local Echo) Call: (with modem) 800-638-8369. Upon connection type HHH (RETURN after that). Wait for the U#= prompt. Type: XTX99587,CPUREPT then, hit RETURN. GEnie costs only $4.95 a month for unlimited evening and weekend access to more than 100 services including electronic mail, online encyclopedia, shopping, news, entertainment, single-player games, and bulletin boards on leisure and professional subjects. With many other services, including the biggest collection of files to download and the best online games, for only $6 per hour. MONEY BACK GUARANTEE! Any time during your first month of membership if you are not completely satisfied, just ask for your $4.95 back. GEnie Announcements (FREE) 1. A WORD FROM GENIE REGARDING SYSTEM SPEED...................... 2. Romance, Love, Parties, Prizes............................*VALENTINE 3. Download Connecticut's New Income Tax Regulations Now......HOSB 4. A FREE GIFT................................................*ORDER 5. New The Business Resource Directory(tm) -- Get listed now..DIRECTORY 6. Olympic News -- Get the latest.............................SPORTS 7. Special free RTC for Japanimation and Manga Online Users...JAPAN 8. ROMANCE in Science Fiction RTC, Valentine's Day in the.....SFRT 9. Special Valentine RTC: Relationships and..................ASTROLOGY 10. Sesame Opens Doors - And Now it Opens Windows..............GENEALOGY 11. History and Culture of Old Garden Roses RTC Feb 14 9EST....HOBBY 12. Meet QBOOK author Bob Butler live & online in..............FOOD 13. Romance in the adult space fantasy.........................FED 14. Disney World - SpectroMagic, Sorcery, IllumiNations in.....FLORIDA 15. Back When Chaos Reigned, They Created......................ORBWARS Welcome to the ST Roundtable ** ** * * * * Happy Valentine's * * * Day * * * * * * * * * Welcome ****** ******** ** ** ** To the ** ** ** ** ** GEnie ****** ** ST ** ** ** ATARI ** ** Roundtable ** ** ** ****** ** ** ** ** *** ** *** The Official Online Resource of Atari Corporation *** ** *** ************************************************************************* Regular Open Conference every Wednesday night, 10PM EDT, 7PM PDT DTP conference every Monday at 10PM eastern in room 3. GEnie Information copyright (C) 1991 by General Electric Information Services/GEnie, reprinted by permission *********************************************************************** > GEnie CODEHEAD TECHNOLOGIES Online Conference STR FOCUS ======================================================= February 12, 1992 <[Sysop] JEFF.W> On behalf of the Atari ST Roundtable, I welcome all of you to the CodeHead Technologies RealTime Conference. Before getting started, some business about how an RTC works. While the RTC room is in Listen-Only mode, you can only address our guest when I let you talk. To get my attention, just /RAIse your hand. Just enter this from your keyboard: /rai I'll acknowledge your raised hand as soon as I can, but please be patient. I -WILL- let you know when your turn is coming up. Some other RTC commands are: ? - Lists all RTC commands. /sta - Status (list) of everyone in the RTC room. /exi - Exit the RTC, but you remain logged onto GEnie. /bye - Log off of GEnie directly from the RTC. /rai - Raise your hand. Lets me know you wish to address our guest. And now, let's get started. CodeHead Software has been around churning out great utilities and system enhancements for the ST for quite some time and they've developed quite a loyal following. And justly so. Lately, Charles Johnson and John Eidsvoog have been taking the newly renamed CODEHEAD TECHNOLOGIES in added directions, which are are here to talk about tonight. So without further ado... John and Charles, thank you very much for joining us this evening. Do you have any opening remarks to make before I start taking questions from the floor? (You folks can start /RAIsing your hands now.) Yes, I've got a file prepared... I'm afraid that it may scroll by quite fast... If you're ready, I'll let 'er fly. <[Sysop] JEFF.W> Folks can use CONTROL-S to pause it and CONTROL-Q to resume. Hello everyone and thanks for coming this evening. CodeHead Technologies, formerly CodeHead Software, is proud to support the Atari community by continuing to release new products. Most of you know that we've provided a full line of utility software including G+Plus, MultiDesk, HotWire, MaxiFile, CodeHead Utilities, LookIt & PopIt, CodeKeys, and MIDIMAX. Last August we began releasing a line of graphics products including Avant Vector, Genus, MegaPaint, and the Cherry font collection. Our latest aquisitions are Quick ST and the TOS Extension Card and we'll soon be releasing MIDI Spy. The TOS Extension Card is a hardware device that allows owners of older machines (520/1040ST and Mega ST) to upgrade to the latest version of Atari TOS, complete with a new and greatly enhanced desktop. Anticipating a few of your questions, we'll offer the following information: We are expecting to ship the first order of the TEC (TOS Extension Card) next Tuesday, February 18th, barring any unforseen delays . The standard TEC lists for $139 and requires the soldering of 22 wires to your 68000 CPU chip. There are two solderless options available for $155 each if you have either a Mega ST bus connector or a socketed CPU (through the installation of a hardware accelerator or PC emulator). All versions include the TOS 2.06 ROMs. We are also offering the TOS chips separately ($60) for STe owners, who can upgrade their machines by simply plugging in the new chips. The release of Quick ST is still a few weeks away, but we are in the final stretch, having squashed dozens of bugs and completely revamped the user interface. Suffice it to say that Quick ST 3.5 will be a true CodeHead product, completely with the quality you've come to expect from us. Owners of Quick ST or Turbo ST may upgrade to version 3.5 by sending us your original disk and $20. The upgrade will include a new manual. The list price for Quick ST 3.5 is $44.95. MIDI Spy has been delayed almost two months from its original release date. For this we are sorry, but we've had to attend to the more important projects of readying the TEC and Quick ST. We thank you for your patience. Needless to say we are devoted to the Atari community. We are now open to your questions. <[Sysop] JEFF.W> Have you received any TOS 2.06 chip sets from Atari for the TEC boards yet? Or is that one of the possible unforeseen circumstances? :-) Yes, we received our first shipment yesterday. It is TOS 2.06, contrary to the rumors that Atari is holding off for TOS 2.07. <[Charles] C.F.JOHNSON> Yep, we just got our first shipment of chips today. Er, uh, yesterday. :) All that remains for the release of the TEC is the completion of the packaging. <[Brien King] B.KING8> Hi John, I own a TT030 and would like to know if Quick ST will run in TT RAM. Charles? <[Charles] C.F.JOHNSON> I'm checking it right now on my TT..... <[Brien King] B.KING8> Great Service! <[John] J.EIDSVOOG1> Quick ST definitely runs on the TT, but I don't recall running it in TT RAM yet. <[Brien King] B.KING8> If it does run do you think it would make it any faster? <[John] J.EIDSVOOG1> I don't see why it shouldn't. Yes, it should be at least marginally faster. <[Brien King] B.KING8> Ok, will this release work with FSMGDOS? <[Charles] C.F.JOHNSON> Yes, Quick TT runs in fast RAM. No problems. <[John] J.EIDSVOOG1> Yes to FSMGDOS. <[Charles] C.F.JOHNSON> Yes, it's also 100% compatible with FSM GDOS. <[Brien King] B.KING8> Ok, my disk and $20 will be on its way next month. Thanks. <[John] J.EIDSVOOG1> We have squashed virtually all known bugs and compatibility problems. This seems to represent an optimism about the Atari market that I did not detect last year about this time. Do you guys feel that things are tur- ning around? <[John] J.EIDSVOOG1> Hmmm... <[Charles] C.F.JOHNSON> Hmmmm... <[John] J.EIDSVOOG1> Anything's possible. <[Charles] C.F.JOHNSON> I will say that Atari seems to be taking more interest in the US market than I've seen for quite some time. <[John] J.EIDSVOOG1> Maybe we have no choice, it's really hard to say. The broader product base should make you, at least, more competitive. I guess it's called "diversification". <[John] J.EIDSVOOG1> Or spreading oneself thin? <[Sysop] JEFF.W> CodeHead is taking on products from overseas to market in the US. Why have you decided to move in this direction? <[Charles] C.F.JOHNSON> That Japanese prime minister who said that Americans are "lazy" hasn't seen what's going on at CodeHeadQuarters lately. Jeff: one of the main reasons we started importing (and supporting) European products is because the ones we've chosen are excellent pieces of software, that deserve a market here in the US. Also because we wanted (and needed) to branch out into more "application"-type thingies, in order to stay in business. <[Des Tang] D.TANG2> I think it's time to upgrade my Codehead software. Can you post the latest version numbers somewhere convenient , maybe cat 1 top <[John] J.EIDSVOOG1> We have our own "versions" topic in Category 32. I have to admit, though, that we have not kept it up to date. <[Des Tang] D.TANG2> ok, I'll check it out. Looks like I'll be buying some new software too <[John] J.EIDSVOOG1> I'll try to get the latest version up there. We've been making an effort to send out an info sheet with every order leaving our offices. Will the megapaint ever support color? 24bit etc.? What I mean is being able to display full color on screen. <[John] J.EIDSVOOG1> We've actually never specifically asked Tommy Software if they plan on doing a color version, although I've been meaning to do it. Of course, there are dozens of things I've been _meaning_ to do. ok thanks I'll be waiting when it might come out. :) <[Sysop] JEFF.W> Can you give us a brief description of MegaPaint and what distinguishes it from other graphic applications? <[Charles] C.F.JOHNSON> Jeff, it's almost impossible to give a "brief" description of Megapaint- .... <[Sysop] JEFF.W> <[Charles] C.F.JOHNSON> The program is so packed with features that the manual runs over 300 pages. John, do you want to list a few? <[John] J.EIDSVOOG1> One thing we especially like about MegaPaint is the "external module" feature. It allows us to put our own signature on someone else's product. MegaPaint's main forte is its speed. It's incredibly fast. Many of its functions outrun other graphics programs by a factor of 20 times. <[Sysop] JEFF.W> It works in which graphic file formats? <[John] J.EIDSVOOG1> It will load bit-map graphics in its own BLD format, PCX, PIx, PCx, TNY, and straight 32K files. It loads CVG and VEK vector formats. Some of these formats are supported by our external modules. <[Charles] C.F.JOHNSON> And vector graphics in CVG (Calamus) format, and its own VEK format. We've also done an external module that allows it to import Calamus outline fonts. <[John] J.EIDSVOOG1> We're talking about doing modules to support other formats as well such as maybe EPS, GEM3, and FSM fonts. As for graphics functions, it includes just about any kind of tool you can think of. <[Charles] C.F.JOHNSON> There IS a demonstration version of MegaPaint in the GEnie library, if anyone would like a closer look at it. <[John] J.EIDSVOOG1> Many of them are very CAD-like features, such as tangents and perpendic- ular lines to name a few. <[Sysop] JEFF.W> And you've been making your add-on modules readily available via the onlines, haven't you? <[Charles] C.F.JOHNSON> That's right, Jeff. <[John] J.EIDSVOOG1> Yes, they're free. <[Sysop] JEFF.W> Very nice! <[John] J.EIDSVOOG1> You're welcome . <[Craig] C.ROSE4> My main question is compatibility. I have a 1040st upgraded to 4 megs via Z-ram. Will the extension card work? And secondly, do you think it will all fit inside the shell? <[John] J.EIDSVOOG1> We have not yet tried installing a TEC in a machine with Z-ram. It should fit fine physically, although Z-ram has a history of causing problems in certain circumstances. I wish I could give you more concrete information. <[Craig] C.ROSE4> Even so, if I would like it installed, where do I take my machine? <[John] J.EIDSVOOG1> We will be compiling a list of dealers who are capable of the installat- ion. <[Craig] C.ROSE4> Great. That's all I wanted to know. Keep up the great work! <[John] J.EIDSVOOG1> This will allow us to refer users to their nearest dealer. What a con- cept . John, many people have tried importing from Europe. Some have not done so well, what are some factors that have to be considered? <[John] J.EIDSVOOG1> As Charles mentioned, the main requirement is that you have a knock-out product. This is something that is a must for us. Avant Vector is without a doubt the best auto-tracer on _any_ platform and is well worth our attention. Do the Europeans demand big orders up front? <[John] J.EIDSVOOG1> The orders depend on the company. We've been dealing with three different companies in Germany. They all approach the US market differently. Some expect a bit too much, but we must just be firm with our position. I have also found some really funky user interfaces on European products. Any comment? <[Charles] C.F.JOHNSON> JD: not on any products WE carry. THat's one of our MAIN requirements....that the user interface be up to CodeHead standards. Just to address the "user interface" issue a bit more, one of the most impressive things about Avant Vector (for example) is its absolutely incredible interface. The more I use the program, the more I'm blown away by how _easy_ it is to use. As programmers ourselves, we really appreciate, and understand the issue of a powerful, yet transparent interface, and as I said, this is definitely one of our main considerations in deciding to import any product. Thanks, Guys. <[Sysop] JEFF.W> Would it be safe to say that part of the success (or failure) has to do with the people doing the importing? If the importers are committed to the product and the market, that's also a plus. Look at Calamus and ISD, for example. <[John] J.EIDSVOOG1> Yes, that's true. If we do not support and advertise the product proper- ly, it will not do well. Yes, Nathan's done a fantastic job with Calamus. <[Scott L.] S.LAPHAM1> Looking back to the first piece of software you guys released (what was it??) did you ever imagine you'd have as many products out as you do now? And do you see yourselves getting bigger (product-wise) and keeping up with upgrades?? <[John] J.EIDSVOOG1> It was G+Plus. <[Charles] C.F.JOHNSON> No, I don't think we did anticipate the depth of our product line, way back when we introduced G+PLUS. In fact, we were uncertain about whether to order more than 100 manuals for G+PLUS. Events have a way of surprising you. <[John] J.EIDSVOOG1> G+Plus spawned from our own frustration with the slowdown of GDOS. <[Sysop] JEFF.W> A.GERVAIS is up next. Hello! I would like first to congratulate all your formidable work! <[Charles] C.F.JOHNSON> Thanks! My interest in mainly in music and software related to it like MIDIMAX and MIDI SPY, could you tell me more about this latter? <[John] J.EIDSVOOG1> MIDI Spy...yes...I'm sorry to say that this product has been delayed longer than we would like. I'm still trying to find time to finish up the manual. The idea of MIDI Spy is that you simply install it as an ACC. You can then forget about it, but if you happen to play anything on your MIDI keyboard it will be recorded...without any forethought by you. It's for those times when you are not using your full-featured sequencer. Maybe you're in your word processor, or even logged onto GEnie. If you happen to reach over and "get into it" on your keyboard, your ideas will not be lost. You can also load complete songs into it and play them in the background while you do other things. There's a demo in the library here, if you'd like to check it out. <[Sysop] JEFF.W> Followup, AG? That sound really interesting! About compatibility, has it been tested with a sequencer like NOTATOR? <[John] J.EIDSVOOG1> I haven't fully tested it with Notator but it has a companion program, Captain Hook, that should allow it to get along with virtually any other program. <[Ringo] R.MONFORT1> First it is very nice to have you here tonight. Second I have a question about Avant-Vector, what is the current version and how much is it? <[Charles] C.F.JOHNSON> The current version of Avant Vector is called Avant Vector EPS. We have a special introductory offer that lasts until March 1st....$495. After that, the price is going to be $545. And before everyone gasps at the price, please remember that Avant Vector is a serious professional application, that competes with (and beats!) similar products for the Mac or the PC. <[John] J.EIDSVOOG1> The new EPS version has even better EPS support than the previous Avant Plot version that sells for $895 !! <[Ringo] R.MONFORT1> What file format does it support and will it support color in the future? <[John] J.EIDSVOOG1> It loads just about any kind of bitmap graphic available. The bitmap importing is only for auto-tracing, and output formats are CVG, GEM3, and EPS. It also loads those three vector formats. <[Ringo] R.MONFORT1> Will the vectors be in color? <[John] J.EIDSVOOG1> There is no current support for color, but TradeiT's other product line, Repro Studio, has some very nice color capabilities for both vector and bitmap graphics. <[Sysop] JEFF.W> We're going to pause in the questions here to let CodeHead Technologies give away a copy of MegaPaint Professional. We're going to do it a little differently this time... Charles is going to ask a CodeHead Trivia Question. Then I'll give y'all a little time (like about 10 seconds) to ponder the answer and get it typed in, and then I'll put the room into Frenzy mode. Whoever's CORRECT answer shows up first, wins. Okay. Charles, ask the question. Then after about 10 seconds, get ready to hit your RETURN key, folks! <[Charles] C.F.JOHNSON> OK...for a free copy of MegaPaint Professional.... What was the SECOND product introduced by CodeHead Software? tick....tick....tick.... [Ten seconds later...] ** Room is now in the talk mode. Room is now in the talk mode. HotWire <[Scott L.] S.LAPHAM1> pinhead HotWire <[Zubs] SPECTER> multidesk <[Joe] J.MIRANDO1> AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAABBBBBBBBBBBBBBBBB BBBBBBBB BBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBAAAAAAAAAAAAMultiDesk? <[Craig] C.ROSE4> what is codekeys <[Network 23] R.MARTIN22> CodeKeys <[Gerald] G.NELSON16> maxifile <[Brien King] B.KING8> G+plus <[Hutch] FAIR-DINKUM> G+Plus <[Dave] D.HAEFNER> hotwire? midimax <[Martha Dycus] M.SUMMERS> Little Green Item Selector pinhead MultiDEsk <[Des Tang] D.TANG2> Hotwire <[jim] J.MOSES2> maxifile BBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBAPMULTIDESK Hotwire ** Room is now listen-only. Room is now in listen-only mode. <[Sysop] JEFF.W> We have a winner. <[John] J.EIDSVOOG1> <[Sysop] JEFF.W> That was fun! <[John] J.EIDSVOOG1> It was MultiDesk and Specter was first. <[Zubs] SPECTER> Great! <[Sysop] JEFF.W> Congrats, Zubs! <[Zubs] SPECTER> (Lucky Guess) <[John] J.EIDSVOOG1> Zubs, send us your address in E-Mail and we'll send you a MegaPaint Professional as soon as we get more in stock . <[Zubs] SPECTER> Will do and Thanks alot! <[Sysop] JEFF.W> Okay! On with the RTC. We're running long here, but there are plenty of folks with questions yet so as long as Charles and John can hold out and you folks care to stick around, we'll continue. Des is next. <[Des Tang] D.TANG2> John, re: font support in MegaPaint, think UltraScript <[Charles] C.F.JOHNSON> As we used to say in Hawaii, hele on, bradda. <[John] J.EIDSVOOG1> Ultrascript? Are you saying we should output Postscript? That's one of the things we're considering...or at least EPS (encapsulated Postscript). <[Des Tang] D.TANG2> No, just to use the fonts in the program, I have the PS35 font set. <[John] J.EIDSVOOG1> We're considering methods for importing Type-1 fonts. It may come in the form of a font converter....that _works_ <[MARC] ACTOR> Is there any newer version of G+Plus? Also I love Multidesk Deluxe!! <[John] J.EIDSVOOG1> The latest G+Plus is 1.5. We don't have plans to do a FSM G+Plus, if that's what you're asking. <[MARC] ACTOR> How much to upgrade? <[John] J.EIDSVOOG1> $10 plus your original disk. <[MARC] ACTOR> No. I wasn't asking about FSM Gdos. <[Gerald] G.NELSON16> I own Quick ST 3.3 and when I run realtime The smart editing screen is distorted, have you checked into this? <[John] J.EIDSVOOG1> The smart editing screen? I'm not sure I know what you mean. <[Gerald] G.NELSON16> Also is the TEC board socketed for further upgrades? <[Charles] C.F.JOHNSON> What's realtime? <[Gerald] G.NELSON16> Realtime is a wonderful little sequencer from DR. T. <[John] J.EIDSVOOG1> The TEC will accept all future TOS upgrades with a simple plug-in solut- ion. <[Sysop] JEFF.W> Have either of you had experience with Realtime and Quick ST? <[John] J.EIDSVOOG1> No, I haven't tried it. <[Charles] C.F.JOHNSON> Gerald: we'll have to take a look at that. This is the first we've heard of a problem with RealTime. <[John] J.EIDSVOOG1> We're quite confident that we've fixed all compatibility problems with Quick ST. If not, we'll fix them shortly after the first release with a patch program, if at all possible. Hello. I have some questions about CodeHead Ed. I understand it is based on micro emacs. Does it use a mouse? Is it GEM oriented (menus)? Will my 3.9+ .emacsrc file work with it? <[Charles] C.F.JOHNSON> CodeHead ED is based on EMACS, that's correct. Your emacs.rc file should work just fine, as far as I know. CodeHead ED does not have a menu bar, but it does use the file selector to get filenames. <[John] J.EIDSVOOG1> For those that don't know what we're talking about, we have an accessory version of Micro Emacs called CodeHead ED. It's included in the CodeHead Utilities release. <[Sysop] JEFF.W> Followup, RC? Does it use a mouse? <[John] J.EIDSVOOG1> The only GEM orientation is the fact that it's an accessory and it uses the file selector. There's no other mouse support. I'm not sure if your entire RC file will work, but it does support command files. I believe it's version 3.9, but I'm not sure. <[Dave] D.HAEFNER> I have a question regarding compatibility between your products and MIDI multitaskers. Are they compatible, or do the systems hang? <[John] J.EIDSVOOG1> Well, since many of our products are memory resident, there's is some system overhead involved. The more utilities you have installed, the more likely the chance of a MIDI overflow. This is caused by the fact that Atari uses the same interrupt routine for keyboard, mouse, MIDI, and joystick. I've written a program called Captain Hook which should help solve some of these problems. There will be a new version of Captain Hook that should go further toward solving these problems, but the current version has already solved the problem for a number of users. Captain Hook can be found in the library here, and it is shareware. It's also going to be able to talk directly to MIDI Spy to allow MIDI Spy to co-exist with our many products. <[Charles] C.F.JOHNSON> Another important point is that many MIDI developers seem to exist in a complete vacuum, and couldn't care less about compatibility. This is, unfortunately, a constant thorn in our sides. <[Sysop] JEFF.W> Followup, Dave? <[Dave] D.HAEFNER> OK. Next question: Will the LGF titles be moved up to commercial products, or will they stay shareware? (Some of these are really commercial quality) <[John] J.EIDSVOOG1> Charles? <[Charles] C.F.JOHNSON> At this point, we don't have any plans to make the LGF shareware titles into commercial products. <[Sysop] JEFF.W> Rod next, then Tomas. <[Network 23] R.MARTIN22> RE: Avant Vector. I know it imports all manner of graphic files, but is it's exporting just as versatile? <[Charles] C.F.JOHNSON> Avant Vector exports in CVG, GEM3, and EPS formats. <[John] J.EIDSVOOG1> There really aren't many other popular vector formats. <[Network 23] R.MARTIN22> Thanks. <[Tomas] MUSE> Howdy! Are you writing anything special to go with your TEC package? (as if I didn't know .) <[John] J.EIDSVOOG1> Anything special? ... <[Charles] C.F.JOHNSON> John, you wanna field this one? <[John] J.EIDSVOOG1> Yes, we'll have a program called Icon Juggler which will allow you to load icons in any format and reorder them, sort them, and save them as a DESKICON.RSC file, which is the file used by NEWDESK to define its icons. This eliminates the difficulty involved with "juggling" icons with NEW- DESK. Icon Juggler will be available only with the TEC package and when you buy the TOS chips directly from us. <[Tomas] MUSE> ANY format? You mean NeoDesk, etc.? <[John] J.EIDSVOOG1> Well...It will currently load RSC, ICE, ICN, and NIC files. <[Charles] C.F.JOHNSON> Well, could be. Maybe Neodesk too. :) <[Tomas] MUSE> Thanks. <[HappyCamper] R.GRANT11> Hi, guys! I just got in. <[John] J.EIDSVOOG1> Been camping? <[HappyCamper] R.GRANT11> I hope you haven't been asked this already, but if so, I hope the reply was positive; are we going to be seeing any Codehead Fax software? <[John] J.EIDSVOOG1> We've been considering it, but there are no definite plans yet. <[HappyCamper] R.GRANT11> Hmmm. Well, at least it's still being considered. Thanks, and GA. <[Sysop] JEFF.W> It's about time to let people stretch their legs or go to bed. My many thanks to John and Charles for spending this evening with us. And congratulations to Specter for winning MegaPaint Professional. Thanks guys. Any closing words? <[John] J.EIDSVOOG1> Thanks everyone for showing up...and be sure to put in your orders for the TEC. <[Charles] C.F.JOHNSON> Yes, thank you to everyone who attended! <[Sysop] JEFF.W> Thanks to everyone for coming and participating in this conference. Coming soon to an RTC near you will be an ISD/Calamus SL RTC and at a time to be announced later, an RTC with Atari's Leonard Tramiel! ========================================================================= (C) 1992 by Atari Corporation, GEnie, and the Atari Roundtables. May be reprinted only with this notice intact. The Atari Roundtables on GEnie are *official* information services of Atari Corporation. ========================================================================= > The Flip Side STR Feature ".... a different viewpoint.." ========================= A LITTLE OF THIS, A LITTLE OF THAT ================================== by Michael Lee ---------------- Timeworks Upgrade info from NORMAN238 on Delphi... TIMEWORKS PUBLISHER ST UPGRADE INFORMATION ! ! ! I received a letter from G|S|T Software Products today. Upgrades to Timeworks Publisher ST * * "WILL" * * be available in the USA. For a dealer close to you call: Pacific Software Supply 660 Tank Farm Road San Luis Obispo CA 93401 Tel: 805-543-1037 I talked to John at Pacific and as of 5:30pm eastern time [2/10/92] they had no firm information on what will be involved. Matter of fact it is not well known within PSS that they will be doing upgrades but he did find someone there who had some info on it. He suggest waiting 2 weeks before making any more inquiries. Those who may be intrested GST had a little more than a week since I sent off my inquiry before I got a reply. Mailed it on a Friday and got a response on a Monday. I wish more companies were like this. --------------- About laser printers from Scott Sanders (SDS) - Cat. 14, Topic 11, Msg. 167 - from the ST Roundtable on Genie... Basically, the Atari Laser Printer is a solid machine and a good buy. You do need to consider what I'd say are the advantages between let's say a SLM605 and a HP Laserjet IIp: SLM605 Advantages: 1. Software support is almost unanimous among desktop publishing and graphic programs. Only programs with less printer support don't have drivers for the SLM. 2. DMA Access means not tying up the printer port so you can also have a dot-matrix to do other less-important things. 3. SLM605 toner is cheaper than HP toner. 4. SLM print drivers are usually a lot faster than HP print drivers. 5. You're supporting Atari directly. SLM605 disadvantages: 1. Requires 1kbyte of computer memory when printing for its page memory. 2. If you ever change platforms, goodbye SLM. 3. No emulation cartridges exist (though Postscript and Epson emulation are available through software). 4. If you plan to write your own programs to use it, it can be a bear. HP Laserjet Advantages: 1. Onboard fonts allow you to use fancier fonts with no more than a basic text editor. 2. Onboard memory so no computer memory is required beyond that which the application wants. 3. Customer support. HP has renowned customer support. I'd say the best I've ever seen in the industry. 4. Change printer settings without software on front panel. HP Laserjet Disadvantages: 1. Slower print drivers than the SLM since the parallel port is slower than DMA and a graphic page must be sent in strips rather than in a whole. 2. Less software support though it's been getting much better. IMHO this seems to be the case. In case you're wondering I own and use both an SLM605 and a HP Laserjet III. I like both and use which one gives me the best speed and quality for the job. Generally quality is comparable but the LJ III has resolution enhancement to 600x600 DPI. Hope this helps. ---------------- About the T25 and the Spectre/GCR - From Dave Small (Gadgets by Small) and Jim Allen (Fast Tech) - Cat. 4, Topic 11, Msgs. 137-138 - from the ST Roundtable on Genie... On 25 MHz'ing Spectre, after looking over some code yesterday, it seems to me that asking you to "be cautious for a time" might not be a bad idea. Spectre 3.0 still uses timing loops, simply because there was not time to yank them out, and I am not confident they are "100%". I see some in the mouse on/ mouse off code for the GCR that scare me, and others in the laser printer driver that also kinda shiver me timbers. Could I ask that for the next couple of weeks you be especially careful to keep backups of anything that is not easily replaceable? I want to make *clear* that in NO WAY am I "blaming" or any such thing the T- 25. Spectre 3.0 was updated for the TT in a real rush (because so many orders were pending) and may be imperfect; we do on a 68030/TT at 32 MHz, there are reports of the floppies going marginal if the internal caches are all enabled on some machines. (Code heading into a 68030 WILL RUN AT DIFFERENT SPEEDS depending on WHERE it loads; if it aligns on a 16-byte boundary (e.g., #0,16,32,48 ...) it will load faster.) My concern is that with the reports we've had, there could be a glitch somewhere in the about 1.5 megabytes of source code that make Spectre, and you might lose data. Something that worries me a LOT is that the hard disk routines, *particularly* "Turbo-SCSI" mode, are timing- looped, and it's not news that the hard disk system can be overrun. 25 MHz is getting up mighty close to where the possibility exists in some of my nightmares. Hence, please, for your sakes and mine, please keep good backups until day to day use shows you that the setup is solid and Spectre isn't getting "weird" on you. I am definitely not saying you WILL have problems. I have seen many Spectres humming along at 32 Mhz on TT's with no sweat. But there are reports from time to time of glitches, and I don't want you to lose some data that's important. Please be particularly careful if you get ANY hard disk error messages. (And please let me know of any hard disk or floppy I/O; this 25 MHz 68000 thing is relatively new, and I'd like to know how well Spectre does.) From Jim Allen... Those are very sensible words, I'd recommend anyone putting speed enhancement devices in their system keep good backups of HDisk data, until your system proves itself reliable at the high speed. ---------------- From Bill Rehbock (Atari) about FSMGOS - Cat. 14, Topic 18, Msg. 59 - from the ST Roundtable on Genie... The packaging is finally all done, the last revison of the disks is going to the duplicator Monday, February 3rd. Product should be showing up on shelves shortly. (Finally! :-) IMHO, one of the biggest drawbacks of the original GDOS was the lack of printer drivers that shipped with it, and the lack of developer understanding of the concept in general. "Back in those days", developers weren't used to the idea of a generalized Operating System service to handle all output functions. Developers were used to writing custom drivers for everything, and they thought they could roll their own driver better. (In some cases, they did.) We didn't go with .CVG fonts, because they are inherently _un_hinted, and we wanted as close to the same quality as hand-tuned bitmaps as we could get. We didn't go with Adobe Type-1's, because it takes about 18 times longer to decode, calculate and display Type-1 fonts than QMS/Imagen FSM-9 fonts. There will be conversion utilities available to go from Type-1's to FSM-9 (from third parties). ---------------- About surge protectors - From Sheldon Winick (Computer Studio) - Cat. 14, Topic 22, Msg. 61 - from the ST Roundtable on Genie... An after the fact recommendation -- everyone should have a "good" surge and spike protection device on all computer equipment. Those 'cheapie' surge protection systems in the discount department stores (and unfortunately sold by some dealers as well) simply do NOT provide adequate protection for sensitive electronic equipment. There are several good ones available, but they are expensive (but still are much LESS that the cost of even the simplest of repairs!!). The better units offer complete surge and spike protection on both the master circuitry and individual protection on each individual connection, as well as protection for the phone line. <-- extremely important!!! We've seen more damaged units through the phone line than through the power line. I would highly recommend units such as the Isobar which come with a lifetime gold seal warranty that covers not only the repair/replacement cost of the Isobar, but also anything that is plugged into it, in the event of surge or spike damage! Our best selling unit is the Isobar CCI 6+ which is an under monitor style case with individual lighted on/off switches for each piece of equipment. (We sell one with nearly every system we sell and have never had any equipment damaged while connected to an Isobar. But we typically see 4-6 fried systems every thunder storm season which were damaged by suges or spikes -- and almost all were connected to a 'cheapie' protector). ---------------- Chit Chat about Flash II - from J.TRAUTSCHOL - Cat. 8, Topic 2, Msg. 113 - from the ST Roundtable on Genie... I am not developing Flash II myself. It's being developed by Paul Nicholls, who is a part of a company called Sunsoft System's Pty Ltd in Australia. I am writing the manual and will be handling world-wide distribution of the program. I must say though, that even though I'm not writing any code, I have had a *large* input into the program and what it will look like in it's final form. I've had an excellent relationship with the folks at Sunsoft, and I think the final product will show that. ---------------- From M.FLEMING8 concerning why some ST's with an AdSpeed installed are experiencing 11 bombs on a reset and what can be done about it - Cat. 4, Topic 16, Msg. 224 - from the ST Roundtable on Genie... Just a quick note to say there is a FIX for the 11 BOMB problem on reset recently reported in message #206. I contacted Howard in Tech Support at ICD. Per Howard, it appears that a few AdSpeed boards for the Atari got out of the shop without a particular capacitor. The capacitor is needed due to a change in chip types on some boards. Howard was kind enough to send the needed part to my local Atari dealer, who then attached it to the board, and also switched the AdSpeed internally to boot-up in 16mhz mode. I'm happy to report that my machine no longer places eleven bombs on screen when soft-reset. The *bad* news is that my Supra 52-meg HD still powers up with both the red and green lights on, and the Atari does not recognize it in this state and goes to internal floppy A (this all occurs on hard boot up of the system). Turning the HD power switch on/off a few times usually cures the situation. Oh well. Howard seemed to think this capacitor fix would cure the HD problem too, but perhaps my HD is just going bad? In any case, thanks to ICD and Howard for a very quick fix to the 11 bomb problem! ---------------- From TOPNOTCH about VROOM - Cat. 9, Topic 6, Msg. 27 - from the ST Roundtable on Genie... Well, I just got a copy of VROOM and I thought I'd add my comments to the others. The game play is excellent. The car control is very precise. It would have been nice to have the joystick for championship mode but you wouldn't have two buttons for shifting which I find nescessary. I would have liked to see some handling adjustments options for the car. Not to the extent of Ferrari F-1 but something to control oversteer and understeer. I find that the car car understeers badly and I would like to dial in some oversteer. I would have also liked a few more tracks. The F-1 series uses 16 different tracks so I feel that any game that mimics F-1 should have close to that many. A few more comments as a race fan. I think only one of the real life tracks that the game uses still has F-1 competition. Though most of the tracks used did see use as an F-1 track some have not been used in 15-20 years. I don't care for the changes in elevation and scenery that were added. IMHO the track should replicate it's full scale version. I just can imagine where that they got the idea that Watkins Glen in upstate New York is surrounded by desert and cacti. ---------------- A special diet - From Florence Fried - Cat. 10, Topic 30, Msg. 702 - Home Office, Small Business Roundtable... ....In the meantime, if I can dodge the things that will be thrown at me, I'd like to show you the diet I've been on: STRESS DIET Breakfast: 1/2 grapefruit 1 slice whole wheat bread 8 oz. skim milk Lunch: 4 oz. broiled chicken breast 1 cup steamed zucchini 1 Oreo cookie 1 cup herb tea Midafternoon Snack: Rest of the package of Oreo cookies 1 quart rocky road ice cream 1 jar hot fudge Dinner: 2 loaves garlic bread 1 large pepperoni and mushroom pizza 1 pitcher of beer 3 candy bars 1 entire frozen cheesecake eaten directly from the freezer Diet tips: If no one sees you eat it, it has no calories. If you drink a diet soda with a candy bar, they will cancel each other out. Calories don't count if you eat with someone and you both eat the same amount. Food taken for medicinal purposes does not count. This includes hot chocolate, brandy, toast, Sara Lee chocolate cake. If you fatten up everyone around you, you'll look thinner. Snacks consumed in a movie theater do not count as they are part of the entertainment. For example: Milk Duds, popcorn with butter, red licorice and M&M's. Pieces of cookies contain no calories. The process of breaking causes calorie leakage. Late-night snacks have no calories. The refrigerator light is not strong enough for the calories to see their way into the calorie counter. This is why I've gotten so fat. I've been under so much stress! Until next week..... """"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""" IMPORTANT NOTICE! ================= As a reader of STReport International Online Magazine, you are entitled to take advantage of a special DELPHI membership offer. For only $29.95 ($20 off the standard membership price!), you will receive a lifetime subscrip- tion to DELPHI, a copy of the 500-page DELPHI: THE OFFICIAL GUIDE and over $14 worth of free time. NOTE: Special offers can be found in your favorite Atari magazines: START CURRENT NOTES ST INFORMER ATARI INTERFACE MAGAZINE SIGNING UP WITH DELPHI ====================== Using a personal computer and modem, members worldwide access DELPHI services via a local phone call JOIN -- DELPHI -------------- 1. Dial 617-576-0862 with any terminal or PC and modem (at 2400 bps, dial 576-2981). 2. At the Username prompt, type JOINDELPHI. 3. At the Password prompt enter STREPORT. For more information, call DELPHI Member Services at 1-800-544-4005, or at 617-491-3393 from within Massachusetts or from outside the U.S. DELPHI is a service of General Videotex Corporation of Cambridge, Mass. SPECIAL ANNOUNCEMENT -------------------- Beginning September 1, 1990, DELPHI will begin offering a new plan that will save you money! The new plan is called the 20/20 Advantage Plan and it features 20 hours online for just $20 a month! The $20 is a monthly fee that covers your first 20 hours online via direct dial into one of DELPHI's two direct-access lines, or via a special Tymnet 20/20 Access code. It also gets you additional hours at just $1.20 per hour. And you get free access to several services on DELPHI as part of the Advantage Perks. Other telecom services may have additional charges. Canadian Tymnet users have an additional telecom charge. Office Time access (7 a.m. to 7 p.m., weekdays) may have an additional charge. And of course, other restrictions may apply. But this is still an amazing deal! For more information, contact DELPHI at 1-800-544-4005 and ask for Member Services. DELPHI- It's getting better all the time! """"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""" > MPAINT 4.0 STR Review MegaPaint Professional 4.0 ===================== MegaPaint Professional 4.0 ========================== by Tommy Software Distributed by CodeHead Technologies Reviewed by Doyle C. Helms STaff Editor @ ST Report Part 1 What is MegaPaint Pro 4.0? -------------------------- MegaPaint Professional 4.0 (hence forth called MPaint for brevity) is a monochrome graphic editing and creation tool for the Atari ST/TT computers. The potential for art design and technical drawings are almost unlimited. MPaint will work with BOTH raster graphics such as, but not limited to DRI's IMG format and vector graphics such as GEM (DRI also) and CVG (Calamus Vector Graphics). MegaPaint 4 has the potential for even more graphic import/export file formats by virtue of its "modular" design. MPaint has MANY drawing tools unheard of before in ANY art/graphic design program for the ST/TT. The array of tools and functions are almost staggering to the beginning user.The included manual is user friendly (with a slight German accent) and covers all of the program functions in a comprehensive manner. CodeHead Technologies has already produced several modules already (free of charge by the way - thats is what I call support!) that enhance this program beyond its original strength. Requirements ------------ MPaint requires a monochrome monitor of the 640x400 resolution. The manual states that MPaint can handle a resolution up to 8192x8192 pixels. The manual states that MPaint requires 900K (at least) of memory free. Higher resolutions (640x400 +) require more and in order to use a SLM804, the user system requires at least 2 megabytes of memory. MPaint supports the Blitter chip effectively. I have tested MPaint on a Mega 2 with a T-20 accelerator and TOS 1.04 and also on a MegaSTE4 with TOS 2.05 at all CPU settings (16MHz w/cache-16MHz No cache and "standard" 8MHz). MPaint can be used with a double-sided floppy system or (highly recommended) Hard Drive system. MPaint supports many types of printers. New printer configurations can be "programmed" by the user. New printer configurations are also planned for release. Installation ------------ MPaint is originally installed on your system by running a INSTALL.PRG. The INSTALL.PRG asks a few questions and then the INSTALL.PRG is automatically erased from the disk. Be absolutely certain that the info you enter in the installation process is correct before hitting/clicking on the "OK" button. (Note: rumor has it that several users did not execute the INSTALL.PRG properly and as a result they have had unquenchable cravings for warm prune juice!) So be careful!! The INSTALL.PRG does not transfer files from floppy to hard disk as some installation programs have been known to do. The transfer of data is left solely up to the user. Personally I like to do my own file transfers. The manual is very clear about what file goes in what folder for your installation process. Program Start Up ---------------- Once the user runs MPaint he/she is presented with a screen that is GEM "like". You have you mouse and scrolling menu bars and of course the ever present drop-down menus. The drop down menus have a little "extra" touch that I have always enjoyed about the "Mac" desktop, I call them extendable-drop-downs (EDD for short). Let's say you choose the SYSTEM options menu bar selection. You have of course the usual drop down but with an added treat. If you select an item that may have more than one option in itself, a little side menu pops out for a more precise selection. This type of interface is similar in concept also to Calamus and its multi- layered icons. About 9/10ths of the screen is the work area by default. The physical work area is however user definable though. The bottom left of the screen is what MPaint calls a "spotlight". This "spotlight" feature is a permanent ZOOM box showing a 7x7 pixel range around the cursor. I like this feature be cause it allows me to work on the "whole" image and also see minute details of my work area without having to switch back and forth from a ZOOM screen to the actual work area. Next over to the right from the SPOTLIGHT is the COORDINATES box. This COORDINATES box reveals the x-axis and y-axis along with the position in the scaled units. The measurements are based from the upper left corner of the work area. Below the COORDINATES box is the "FILL MODE" display. This area displays the current fill mode such as FRAMED, FILLED or BOTH. The FILL MODE is very similar to most other graphic editing/creation programs. When FRAMED is selected and you draw an object is only framed. What you get is an object where the inside portion is transparent. The FILLED selection shows you object filled with the selected pattern but no frame. The BOTH option shows your FRAMED-FILLED object combination. All in all pretty straight forward. Next to the FILL MODE display is the DRAWING COLOR selection. The DRAWING COLOR is self-explanatory. The LINE PATTERN selection is also included in the same general area. The LINE PATTERN display shows the current line type and thickness. Most of the right side of the selection/display area is the "standard" type fill patterns. Of course the fill type and line pattern can be user edited at any time. That about covers the bottom of the screen selection area, now let's move to higher ground and explore the plethora of options available there in the MENU section. When you see the MANY options there, you will understand why this program is called MEGAPAINT! But wait! What? Already? I'm sorry folks but I'm all out of time for this week, please join us next week when we will find out what Elvis has really been doing all these years since his purported death... or if Geraldo beats us to it, we will continue with a look over of MegaPaint Professional 4.0. In the meantime why not grab the DEMO version from GEnie or Delphi ST Advantage or you local BBS/user group to find out first hand about this powerful program. Until next week... For more info concerning MegaPaint Professional 5.0 CODEHEAD Technologies P.O. Box 74090 Los Angeles, CA 90004 (213) 386-5735 _________________________________________________________ > STR Portfolio News & Information Keeping up to date... ================================ THE ATARI PORTFOLIO FORUM ========================= On CompuServe by Judith Hamner 72257,271 There has been a lot of interest generated in the PC world by products which are designed to save disk space by compressing the size of files. Portfolio owners are especially eager to find new ways to save space because of the limited storage available. BJ Gleason has found a utility which allows several .com files to be combined into one large file. The individual files can still be run separately. This should save room on the card because of the overhead involved with the storage of files. You can also compact the file with products designed to work on .com files and save even more space. Don Thomas of Artisan Software continues his series of PGShow logos with SEARS.PGC. Artisan Software has also uploaded ANIMAT.ZIP. This file contains four separate animations in a stand-alone format. These may be run from the command line or from within batch files. See FREE.TXT for an interesting offer from Atari Advantage Magazine. _____________________________________________________________ > TEC OFFER!! STR InfoFile TOS Extension Card is shipping NOW! ======================== For immediate release CodeHeadQuarters Friday, February 14, 1992 ------------------------- THE LATEST NEWS FROM CODEHEAD TECHNOLOGIES ========================================== TOS EXTENSION CARD RELEASED! """""""""""""""""""""""""""" CodeHead Technologies is pleased to announce that the TOS Extension Card is now shipping. The TEC lets you install the very latest Atari TOS (2.06) in your 520ST, 1040ST, Mega ST, or Stacy. TOS 2.06 has many major improvements over older versions of TOS, including a totally redesigned GEM desktop with custom icons, redefinable keyboard commands, and many other new features and performance improvements. The new desktop contains most of the features of the popular "alternative desktop" programs (and a few new ones too!), but with TWO big advantages -- it doesn't gobble up large chunks of memory, and it doesn't need to load from disk. Just turn on your computer and you're ready to go! NOW INCLUDED WITH THE TEC -- ICON JUGGLER! """""""""""""""""""""""""""""""""""""""""" To make it easier for you to build a library of custom icons to use with TOS 2.06, we've developed a new program called "Icon Juggler," which is included with the TEC. Icon Juggler lets you freely convert icons from ALL the current ST icon formats, including ICE, RSC, ICN, and NIC. Icon Juggler's interface is completely GEM-based; it's like a word processor for icons, with cut, copy, and paste features that make converting your icons a breeze. SPECIAL OFFER FOR USERS OF ALTERNATIVE DESKTOP PROGRAMS --==*** $20.00 OFF! ***==-- With the release of the TEC, we're also offering a special deal for those who've been using one of the "alternative desktop" programs available on the commercial market. Take your Neodesk or DC Desktop master disk, FORMAT IT, and send it to us, and we'll give you a $20.00 discount on any model of the TEC! (Please note that you must FORMAT the disk before sending it to us.) Here are the prices for the TEC, with and without the discount: Model Retail Price Price w/ Discount """"" """""""""""" """"""""""""""""" Standard version $139.00 $119.00 BUS Bridge $155.00 $135.00 CPU Bridge $155.00 $135.00 A brief description of the different TEC models: * The standard version requires soldering, and is for owners of 520STs, 1040STs, and Stacys which do not have a socketed CPU. * The BUS Bridge version, which plugs into the processor bus of the Mega ST, and requires no soldering. * The CPU Bridge version, for computers which have socketed 68000 chips. This option plugs into the CPU socket, and requires that there be enough room above the CPU within the case. All versions of the TEC include the official Atari TOS 2.06 chips. The TEC also has an easily installed option that lets you switch between TOS 2.06 and your existing TOS, to circumvent incompatibilities with ill-behaved programs. TOS 2.06 FOR STE OWNERS """"""""""""""""""""""" CodeHead Technologies will also be offering the TOS 2.06 chips separately, as an upgrade for STE owners. When you purchase the chips from us, you will also receive our manual describing the features of the new TOS, and our disk containing the Icon Juggler and other useful utilities. The price for the chips alone is $60.00. (Note: this press release is being prepared slightly in advance of the actual shipping date; the TEC packages will begin going out the door on February 18, 1992.) For more information, or to order your TOS Extension Card, contact: CodeHead Software P.O. Box 74090 Los Angeles, CA 90004 Tel 213-386-5735 Fax 213-386-5789 ___________________________________________________________ > DATABASE? STR FOCUS Where is THAT file? =================== WHERE DID I PUT THAT DARN THING =============================== by Doyle C. Helms STaff Editor @ ST Report If you are even a casual user of your ST/TT you probably have amassed a large collections of files from PD/SW and commercial sources. If you are like many users I know, you probably have the majority of these files "arc'ed" away somewhere. If you don't have an Arc'ed database of files, then you are wasting A LOT of precious money and disk space. One of the major draw backs to having a lot of these arc'ed files is that many have the same or similar name, even though their function/use may be entirely different. Let's give a short example: SHIRLEY.LZH. Is SHIRLEY.LZH the Spectrum 512 pic file you had or is it the TINY pic file? One way to find out is to locate SHIRLEY.LZH (both of them) and either do an extraction of the files or do a VERBOSE list of the file contents. That route is not too bad if both files lie on the same disk. If they reside on different disks then it is twice the effort. This is going to lead somewhere so please hang with me a moment. Let me assume that you have not consolidated your "arc" files into an organized group. I will give a short tutorial on how I maintain over 150 meg of LZH'ed files. Granted there are many of you that have considerably more than I, but I have culled MANY megs of files I do not need or use. 1> Have plenty of preformatted disks on hand. 2> Execute your particular archival program. 3> Once you have finished archiving a program/data file, give the file name a unique extender to signify the TYPE of program or data arc this particular file is. Example; DEGAS.LZH could one of two files, one could be that it is Degas, the other could be that it is a Degas picture file. If you give the extender a ".DGH" (here I am assuming you are using LZH) extender then the file in my book would be a DeGas picture file. If you gave it the extender of ".GXH", I would consider this file to be a GRAPHIC APPLICATION. NOTE: I altered my LZH program with a disk editor to display a ".??H" extender instead of the ".LZH" when asking for a file name to arc or un-arc. 4> Place the finished file on archival (LZH.001) disk #1. 5> Repeat the above steps until finished. 6> Once you have archived several disks of data, then execute the disk database program and begin to load the disk info. NOTE: One reason I have for giving the extenders unique names is so I do not have to enter info about each and every file in the disk database to determine the contents of that arc. The following is the extenders I use to segregate different file types. EXT. | FILE TYPE __________|______________________ ABH | AUTO BOOT PROGRAMS ACH | ACCESSORIES APH | APPLICATIONS CEH | COMPUTER EYES RAW DATA FILE (CE1) CDH | CAD FILES CMH | COMMUNICATIONS FILES OR PROGRAMS DBH | DATABASE FILES DGH | DEGAS PIC FILES DMH | DEMO PROGRAMS DSH | DISK UTILITY PROGRAMS DTH | DESKTOP PUBLISHING DATA FILES FNH | FONT FILES GXH | GRAPHIC PROGRAMS GFH | GFA BASIC FILES HIH | HI-SOFT BASIC FILES OSH | OPERATING SYSTEM FILES SSH | SPREADSHEET DATA FILES OR PROGRAMS SPH | SPECTRUM 512 PIC FILES TNH | TINY PIC FILES UTH | UTILITY FILES WPH | WORD PROCESSING FILES OR PROGRAMS The above list is not complete and can easily be modified to accept your own preferences. I only presented the examples to try to give a better understanding of my system. If I need a menu maker GFA program and I am not sure of the name under which I arc'ed it, all I have to do is a search under "*MENU*.GFH". If I left off the GFH extender I would also be including any other file with the name "MENU" in it. The result I want is to filter out all unwanted file types. If I want ALL my GFA (source) programs listed, I would simply search under "*.GFH". Simple huh? Until next time... ____________________________________________________________ > TAF SHOW 1992! STR SHOW NEWS SHOW NEWS & UPDATES! ============================ FOR IMMEDIATE RELEASE CONTACT: John R. Sheehan, SJ TAF President - (416) 926-1518 GEnie: J. Sheehan14 + + + On April 4th and 5th, Atari Canada and the Toronto Atari Federation will host what may be the most exciting Atari event in North America in 1992. To be held at the Skyline Hotel on Dixon Road, near Pearson International Airport, , ACE '92, the Atari Canadian Exposition will feature the most outstanding developers in the Atari world with some of the latest programs and program updates. Local dealers will exhibit the latest hardware and peripherals, and user groups from across Canada and the United States will be on hand to share Public Domain and Shareware programs and exchange knowledge. Door prizes throughout both days of the show, special show prices and several major door prize packages will add to the excitement. Facilities will include a 22,000 square foot convention area, an additional 7,000 square foot display and exhibit space, and 7 separate meeting rooms that will host a wide range of seminars, demonstrations and mini-concerts. On Saturday evening, a formal banquet will bring together local users with major figures in the present and future course of Atari. This is the third major convention that the Toronto Atari Federation has hosted in recent years. As one of the largest user groups in Canada, if not all of North America, TAF has consistently helped bring the best and most contemporary computer technology to Toronto users. With membership of approximately 300, TAF will provide the core volunteers that make an event like this possible. However, other user groups will also be invited to participate, to help stimulate exchange of information among the various Atari groups in this region and to help broaden the base of support for this special event. Atari Canada General Manager Geoff Earle has said that this April event could easily surpass the recent Chicago convention, both in attendance and participation by developers and programmers. Basing their participation on the successful Chicago model, Atari Canada will assume many of the initial commitment costs, including facility costs and advertising. TAF will coordinate activities and provide volunteer help. TAF President John R. Sheehan, SJ noted, "The enthusiasm of our members is the reason we felt this was a good time for a show. So many members had been asking about a show, and volunteering to help that we felt we really could present a spectacular two-day event. We couldn't try it without our volunteers, but with their help, this April will see the most exciting Atari show Toronto has ever seen!" Packets for dealers and developers are being prepared and should be mailed by the end of January. Information packets for user groups will be available at around the same time. The Skyline Hotel will be offering special room rates to participants, and special travel plans should also be announced shortly. To be placed on the mailing list for Convention information, please send your name, address, and affiliation (developer, user group, dealer, etc.) to TAF's mailing address, 5334 Yonge Street, Suite 1527, Toronto, ON M2N 6M2 or leave a message at (416) 425-5357. ATARI TALENT SHOW ANNOUNCED """"""""""""""""""""""""""" As part of the Atari Canadian Exposition, ACE '92, April 4/5, a special talent competition has been announced. To demonstrate the many ways that Atari computers can be used in creative entertainment, two divisions will be open for submissions. The contest is open to all Atari Users. MUSIC AND SOUND --------------- Since Atari has long been an industry leader in MIDI applications, one division will be open for applications of sound and music. Entries may be live performance, combination of live and pre-created or totally pre-created arrangements of music and sound. Entries may be original compositions or adaptations of existing material. (Initial submission must be made on cassette tape; if accompanied by visual effects, appropriate disk program or description must also be included.) GRAPHICS OR ANIMATION --------------------- Since Atari can manipulate over sixteen million separate colors, visual arts provides another rich field for creative work. In this field, entrants may submit animated segments, or graphics displays. Submissions may include "slide shows" of created works, demonstrations of works being created, or animated creations of any type. Entertainment value will be the criteria for judging. Individual presentations should last no more than 10 minutes. Entries will go through preliminary judging, and those who are accepted will make public presentations or performances throughout the day on Saturday, April 4th, at ACE '92. Performances will be open to those attending the Exposition at no charge, and judging of finalists will take place prior to 4PM. Winners will attend the evening banquet as guests of Atari Canada. Each contestant will present their entries or performances at the evening banquet, at which time they will be judged a second time, and prizes awarded. Judging will be on the basis of creative use of the computer and entertainment value. FIRST PRIZE in each division will be a $700 gift certificate from Atari Canada, good towards the purchase of any Atari product, and a one-year membership in the Toronto Atari Federation. SECOND PLACE WINNERS will receive a $200 gift certificate from Atari Canada, and their choice of 10 disks from the TAF Library. Third Place Winners will receive a $100 Gift Certificate, and their choice of 5 disks. For an entry form, contact: ACE '92, c/o TAF 5334 Yonge Street, Suite 1527 Toronto, ON M2N 6M2 Or call: John R. Sheehan, SJ TAF President (416) 926-1518 or leave a message on the TAF BBs (416) 425-0318. ACE 92 TO FEATURE GAMES AND 8-BIT ================================= ACE '92, the Atari Canadian Exposition, will be held in Toronto on April 4th and 5th. As part of the many different events scheduled for the two-day exposition, two separate games areas will be set up with equipment provided by Atari Canada. A nominal charge of $1.00 will be levied for admission to each area, with all funds raised here to be donated to Sick Children's Hospital in Toronto. Admission to the Games Area is in addition to the regular admission charge. Area 1 - THE LYNX CHALLENGE. The $1.00 contribution admits participants to a timed game playing session. The high score in each session is registered. At the end of each day, a special prize package will be awarded to the high score of the day. The package will be provided by Atari Canada and will include: One Lynx machine, AC adaptor, and a collection of games. Area 2 - GST AREA (Games - Sampling and TryOut) $1 contribution admits the participant to sample one game cartridge. A variety of games for the Lynx will be available, but each "Tryout" requires a separate admission to the area. Many of the dealers present will be offering special discounts on a wide range of game for different Atari machines, as well as significant savings on games cartridges and games programs. Although most of the exposition will feature more "serious" applications on the Atari platform, there will be a good selection of games available, and serious players to share hints and help. There will also be a special area for 8-bit dealers and developers, a place for the dedicated XL/XE user, those who still have and use the 800 and 400 machines. Although commercial programs are getting harder to find, many clubs will have their public domain and shareware libraries available, and dealers who still have 8-bit material will have it available. ACE 92 will be held at the Skyline Hotel on Dixon Road, near Pearson International Airport. Further information, exhibitor's kits, advertising rates and advance ticket sales may be obtained by contacting: ACE '92 c/o TAF 5334 Yonge Street, Suite 1527 Willowdale, Ontario M2N 6M2. Contact: John R. Sheehan, SJ (TAF President) (416) 926-1518. TAF BBS: (416) 235-0318 TAF InfoLine and Voice Message: (416) 425-3537. ______________________________________________________ > Comeau PR STR InfoFile GramSlam and Grammar Expert ====================== Phil Comeau Software, division of Wintertree Software Inc. Press Release For Immediate Release Phil Comeau Software, division of Wintertree Software Inc., publishes both GramSlam and Grammar Expert for the Atari computer line. Judging from the many calls and letters we have received, there appears to be some confusion about the purposes of these two products. We would like to clear up that confusion. GramSlam is a grammar and writing-style checker. GramSlam looks for problems and potential problems in your writing. Although it isn't a spelling checker, it works in a similar way: GramSlam scans your document, word by word, looking for and reporting problems as it goes. You typically use GramSlam at the same point in the writing process you use a spelling checker: when the writing is nearly finished. Grammar Expert, on the other hand, is an online reference for grammar, punctuation, and effective writing. Grammar Expert is not a grammar checker. Neither is Grammar Expert a better version of GramSlam. It won't find problems in your writing. In fact, it doesn't read your documents at all. When we say Grammar Expert is a "reference," we mean it is like a reference book. Grammar Expert is a storehouse of rules, guidelines, and advice about grammar and writing. Like a book, the more you use Grammar Expert, the more you get out of it. Grammar Expert works as a desk accessory, so you can easily refer to it while you write. For example, if you are unsure about whether you need a comma in a particular sentence, just pop up Grammar Expert and click the mouse on the word "comma" in Grammar Expert's Table of Contents. Grammar Expert displays the rules regarding the use of the comma. You then find the appropriate rule and apply it. Grammar Expert backs up the rules with plenty of example sentences, so you don't need to be a "grammar expert" to understand it! Does it make sense to own both products? We think so. GramSlam and Grammar Expert improve your writing from two points of view. Grammar Expert helps you to write correctly and well the first time. GramSlam helps to make sure that you did. GramSlam's price remains at $39.95, and Grammar Expert's price is still $59.95. Both products are available from your local Atari dealer or directly from Phil Comeau Software (division of Wintertree Software Inc.). If you would like to know more about GramSlam or Grammar Expert, call or write us at the addresses or number listed below. Phil Comeau Software, division of Wintertree Software Inc. 43 Rueter St. Nepean, Ontario Canada K2J 3Z9 (613) 825-6271 GEnie: P.COMEAU1 CIS: 72060,3056 ___________________________________________________________ > SST SHIPPING! STR Spotlight SST, GCR, MEGATALK =========================== SST Now Shipping ================ Compiled by Lloyd E. Pulley, Sr. Senior Staff Editor Since the SST from Gadgets by Small is now shipping, I thought I'd com- pile some of the more interesting and informative posts about it, the 3.1 version of the GCR software and the new MegaTalk (not shipping yet). All posts are from the Gadgets Round-table on Genie. From Dave Small - Category 1, Topic 6, Msg. 1... YAHOOO!! We're all really pleased to announce that the SST is NOW SHIPPING; all types went out today, bare board, Option A, B, C, C&D! This marks the end of a long wait for the SST, and it's our third product as Gadgets. We'll be shipping to catch up on the backlog for a little while, I rather expect! :-) We had a couple of "unexpected holds" at about T-mimus 2 minutes when our printer shop couldn't get the toner to stick on the solid black regions of the manual, only on the backsides. (Weird! -- never seen that before). Already in the works is SST software rev 2.0 (current is 1.86), which will extend the SST in ways that I'm going to have a fun time with. I have always enjoyed getting new hardware after pretty thoroughly exploring the old. This also enables me to drop the 200% effort on the SST back to some- thing within the realm of "sane" and to taskswitch into 3.1 and fixing a snag in MegaTalk I caught during testing; it looks to be a straight- forward software fix. [GCR software version] 3.1 has been proceeding along quietly; I've been hacking at Sys 7 when I absolutely couldn't bear to look at another 68030 chip, and TT SCSI is in the works, to let people use internal drives. It'll just take some time. There are so few times in one's life that you get to announce that the new product is wrapped and OUT THE DOOR -- this is a neat day for me and everyone here. Thanks for everyone who was very, very patient about the SST. We had some really frustrating delays in our pipeline, and outright defective chips, but George & all of us persevered. (The 450 line note chronicalling the fun we had is in the last issue of ST Report.) ------ From Category 4, Topic 44, Message 44 in the ST Roundtable... SST shipped today in quantity in bare-board, Option A, B, C, and C&D configurations. Since some of them went via warp-drive shipping I expect you'll be hearing owner comments RSN. In the days ahead we will be shipping more (we have this backlog, see), and getting ready for software rev 2.0, which will add some interesting capabilities to the SST. Now that the platform is there, I can have some fun. (*chuckle*) The SST's manual is the hardest I have ever worked at a manual, and I hope you enjoy it both for the facts and for the interludes, which also were the hardest ones ... I had to do a Current Notes article after writing many Interludes and I found myself nearly empty. Sandy did the manual edit and layout in Quark X*Press on her IIfx; near the end, it became apparent we were straining even the 40 Mhz FX on the complex stuff (diagrams and so forth). If you see a box with an SR-71A Blackbird on the cover at the dealer, that's the SST. Oh, yes. Overseas shipments also started today. I felt that the best way to answer any questions on if the SST would ever ship that came up last week was to leave this message; at the time, we were fixing a problem at the printer (toner not sticking to the back side of a page ... now that's odd), checking out the release disks, disk labels, and all that last-minute stuff. This is the third product from Gadgets by Small; MegaTalk will ship pretty shortly, as soon as I fix a software snag I ran into (better now than after shipping!) and finish the PAL replacements (10 minutes), and that'll be # 4. If you've read a spec sheet on the SST anytime, you know about it; we haven't changed our specs (no need to). If I might borrow a phrase from Sculley, it's "wicked fast". To my knowledge it makes your Atari ST into among the fastest ST's in the world (depending on how much Mhz and how few Ns RAM you put in, and where wait-states stabilize.) Since there are other SST's out there, I can't say you will have THE fastest ST in the world, but you can sure try. I suppose it's time to mention that a design change to the SST logic sped up the SST. Figures on its performance are now out of date in the most pleasing way. Anyway, it's out. The champagne is upstairs and it's time for some; this has been as hard a haul as getting the GCR to format a disk, which was a killer. I expect that Darlah is going to be a bit irritated at all the skid marks on the floor of the RT as people fire up their SST's...sorry 'bout that. And keep it throttled back in the middle of conferences, okay? ------ From STACE (Sysop) - Cat. 9, Topic 2, Msg. 69... Several people have asked about SST pricing. I haven't checked with Dave or Sandy to see if these prices and/or product combinations are still correct but here is what I have: 68030 SST bare board (w/ 20mhz and 33mhz oscillators) - the bare board does NOT include a CPU, FPU or any memory - $599.00 Option A: 16mhz 68030 $200.00 Option B: 16mhz 68030 and 4 1-meg SIMMs $460.00 Option C: 33mhz 68030, 68882, and 4 1-meg SIMMs (80ns) $800.00 Option D: 4 additonal 1-meg SIMMs (80ns) $260.00 Please understand that none of the above options (A thru D) include the bare board. Also understand that you can put together a full-blown SST for yourself for less than these prices. (I've seen 1-meg SIMMs as low as $30 each!) Finally...and again... I am not 100% certain that these prices are still in effect. In fact, I am not 100% certain that these options are all still being offered. Please contact Gadgets directly for further information. ------ From Dave Small - Cat. 1, Topic 20, Msg. 30... Hiya folks. It's 3:22 AM so don't expect TOO much coherence, but I'll try. Been testing SST's all day. The MegaTalk board plain should have been out by now, ok? You know it and I know it and we all know it. Something went wrong, and it's driving me batty ... because honestly there is nothing more satisfying than shipping. We had some difficulty getting MegaTalk PC boards (past the basic protos). The PALs got real tricky; there were 3 of them. There were interactions there, where if I recall right (this was awhile back) if you'd take one step forward on one PAL, you'd take two back on the others. Remember this is really tricky stuff; you're syncing up the Apple MHz clocks with the ST bus, and everything has to be in sync before the chip can twang. So some incredible absolute moron ships us CMOS main chips when we wanted plain old boring ones, too. (Said "NO CMOS" on the slip, too.) So we gotta return them, which is slow, because parts companies hate returns, and if they make it a pain, you won't bother. Right? (Sort of like insurance companies hassling you with paperwork before paying up.) Out come the CMOS chips. In go the right ones, which we special ordered, UPS red. (Look, we WERE trying to hustle, okay?) Because I saw out of the blue, into the black, the prospect of the SST and the MegaTalk shipping at the same time, something we had gone to GREAT LENGTHS not to happen, because there are not enough humans here to do both. Let me be painfully honest. Gadgets, financially, is doing fine (knock, knock, as always! *grin* But GCR keeps rolling along). Barb left us in November to set up her Scuba shop in Jamaica. Dan Moore left to go to Oregon to work for Supra. Suddenly all these people I had depended on more than I knew were ...*gone* ... and it was Sandy and I. Christmas happened (deck the halls) and I start testing MegaTalks. Serial I/O is completely $%^#$%^#$%'d on them. Nothing in Atari or Mac modes -- Appletalk down, MIDI down. Call George. Try PAL this-that. Everything starts working. Result: many many many bad PALs stuffed into MegaTalk boards gotta be ripped out, thrown out, new ones gotten, programmed (a little like EPROMS), and plugged in. Available labor: 0. At this point, the SST was taxing my sanity with its blasted disk problems (buffer overlaying code, it finally turned out -- with about 88 blind leads!) This was precisely what I did not want, to do two products at once. In the meantime, someone puts their autodialer onto the Gadgets phone every 20 seconds (we know because we had to shut off Call Waiting); I mean, you put that phone down, RING!, you pick it up within 3 sec. You want to know why you can't get through? Because someone who is the sort that shoves into lines uses an autodialer. (Off the hook? HOOT !! I wish! You know how fried I am after a day on the phone?) But I think it's inevitable we will have to replace Barb. I would like to wait until this shipping insanity ends, until SST and MegaTalk are out there and stable, because anyone new will just hand tech calls to us! So I VERY carefully construct a cardboard protective box around the "Old Sparky" Electric Chair power supply of the Mega-ST, and ask my daughter if she would like to make some money. Key word: money. Zip. I went through it with her, with a checklist, a few times. And as she found a few bad boards, I felt better about it; she wasn't skipping steps if she found a MIDI-down all else okay board. We used an Adaptec- 4000 with 40 meg drive (Adaptecs gen termination power) for SCSI, the LocalTalk (tm) network in the office for parallel, or printer, and MIDI for serial. Then we checked it out in all modes, making sure TOPS worked and MIDI, and that in ST mode the ports could talk. (There is not YET an ST-mode SCSI driver, but hold your breath). I did the PAL swapping; George got me a zillion new PALs to replace the bad serial I/O PAL. (Aren't you glad I checked?) Jenny hung in there like a trooper, checking boards, and got most of them done. Then I discovered something interesting. If you put the MegaTalk ST driver in the AUTO folder, as usual, with no MegaTalk -- you crashola, meester. Bug. Easy to fix; save A7 and bus error, point bus error downstream, restore them. Oh, well, no one thought of it. I also considered the relatively new BCONSTAT stuff where serial port can be mapped around to different devices like MegaTalk. Would it work with Mega-TOS (1.2) or would 1.4 be required? Or, oh joy, 1.62? So I have a little software tinkering to do. The boards is about set in hardware. That's MegaTalk. I know, I know. I did not want to ship it at the same time as SST. The Screwup and Delay division of Raving Idiot Chip Supply synced up really nicely there, dropping it on us. I am *surrounded* by SST boards in their packaging here, folks; I tested 'em all day. (Ever tried to track down a flakey FPU?) But that is how it happened. If I had full time on it MegaTalk would be out now. Good News: I think I'll get ahead on SST's shortly (Sandy is falling a little behind on the papewrwork) so I can get the software mods in and tested. I explained about the phones. Ever got an inch of FAXes? That means you spend all day answering them -- and at the end of the day, you have another inch of FAXes. No kidding. (You can see what I mean about getting help; I never quite realized how much Barb did. But that is awfully dangerous with this bad an economy, folks; I don't want to fold and leave you high and dry.) ...Getting a product out is like a huge AND gate. And if ONE part messes up (in SST, literally EVERY supplier screwed up at least once, no kidding -- thought Sandy would have a stroke!) ... then nothing ships. Like the CMOS chips or PAL. On your side you have Jenny, who is deft fingered, thrilled to be making money Like Dad Does (*chuckle* ... *sigh*), and who tests the devil out of the MegaTalks, checking off each thing to test. She's caught some subtle bugs -- told her to ask me if ANYTHING looked wrong. "Gee, dad, the screen stays black when I turn it on." Eric (10) burned the SST's EPROMs and did a fine, fine job. That is one dull job, but with the help of comics and a Walkman with the Turtles tape, he made it through. So I'm saying,it's the final hours, hang in there. Joe, I am tempted to hand- deliver. (Or at least let me get my Kevlar before you start shooting!) Finally, financially -- the amount of money we had to put into SST boards far, far, far exceeds MegaTalks. We actually had to use credit (*gasp*) for some things -- them 030's is EXPENSIVE, beaucoup bucks. We had to focus on SST's to ship first from where we were. Dod'z the truth, folks. SST is shipping as fast as I final-check them (they already been through the mill, this is a paranoia check), and MegaTalk awaits a little software, and a little research, I 'spect. I'm sorry to those who have had to wait so long. I hope when you get your packages that what we put in them makes up for it a little. It's very good to have such loyal customers, and the notes and calls of "hang in there" have made a big difference. ------ George Richardson (Merlin Group) - Cat. 9, Topic 6, Msg. 1... I've fielded quite a few questions on the ability of the ST power supply to handle the load of the SST, so I figured to answer some questions and kind of place a little ad here at the same time. :-) An ordinary Mega supply is *usually* quite capable of handling the extra load of a 33mhz SST with 4 megs of fastram. We've only seen one failure, and that supply was in a machine that was flakey anyway, so it was probably on the edge. Chances are that if your machine was functioning without trouble before, it'll be fine up to 33mhz/4 megs with an SST. The 8 meg configuration is more difficult to gauge. We haven't had problems, but the noise level on the supply does rise, even though there really isn't that much of an extra load on the supply. Due to it's design, the DRAM only draws heavy current when it's being accessed. Since only one bank of 4 SIMMs is accessed at a time, the total current draw only increases by the small amount that the DRAMs draw when idle. This is still pushing it. So the bottom line on 8 megs is: If it works, fine. Don't be suprised if it quits though. If you've got some other add in besides the SST, like an ISAC, Moniterm or Megatalk (soon), You've fallen over the edge. Even if it runs, it may be flakey. These boards all draw a considerable amount of current on their own, and adding the SST is like handing an anchor to a swimmer. Down she goes! We've had this in mind for some time, So I've been looking for a solution, and I've got one. I'd like it to be cheap, but unfortunately it's not. It is however, not bad compared to the installed price of a new Atari or Best supply. If you want it you can send me either your machine, or just the power supply out it (*including the metal chassis*). I'll pull the power supply board off, mount the new supply, which requires some modifications to the chassis, and send it back to you for $100. The specs on the new supply are pretty good. The old Atari & Best supplies are 35 watt units, good for between 3-4 amps on the 5 volt line the CPU uses. This new supply is a 45 watt unit, good for 5-7 amps on the 5 volts. It also can run on voltages from 90-265 volts AC or 120-364 volts DC. It'll take line frequencies from 47-63hz. All this without changing swtches or jumpers. It's got UL, CSA, IEC, FCC class B (Atari take note! *grin*), and VDE approvals. It's also got a one year warranty. Just so you know, if you need it, we've got it. The only gotcha is that we've got to mount it. It doesn't pay to design new brackets for the thing, it'll just drive the cost up. George Richardson Merlin Group, Inc. Power Supplies "R" Us division P.S. The $100 price should be stable for a couple of months. After that, I'll see how much money I lost and possibly revise the price. :-) ________________________________________________________ STReport International Online Magazine """""""""""""""""""""""""""""""""""""" EDITORIAL PAGE """""""""""""" > STReport's Editorial Page "Saying it like it is." ------------------------- From the Editor's Desk ---------------------- Many times I've rejoiced in being able to accomplish the things I do with my computers. The pride, the exhilarating sense of accomplishment and of course, the gratification. I can remember the days when I obtained my first ST the 520. My oh my, was I in hog heaven. Truth was at the time, I was intimidated by it and what it could do... for about 20 minutes. The ST was and is STILL the easiest machine to learn how to use. Yet in those days, it was indeed on the cutting edge of consumer computer technology. You were able to walk in most any computer outlet and overhear people heaping praise on the "JackinTosh". Everyone either wanted one or was sorry they bought brand X. Perhaps all of us have come to continue to expect Atari to provide us with computer technology that's on the cutting edge of tomorrow at affordable prices. Maybe its possible maybe not. I know one thing, I like having a computer that can do exactly what I wish. I only hope the future holds as much promise as the past held satisfaction. For once I cannot be held accountable for resurrecting the "Old Osbourne Harp". Seems someone else has made an announcement about new machines being put on 'display' in March and then twice in April. Atari is moving forward in the right areas. Of this there is no doubt. As Jim Allen would say; "Go Atari!" Ralph @ STReport International Online Magazine "Reporting ABOUT Atari, not FOR Atari!" Friday, February 14, 1992 - 5:54:58 pm """""""""""""""""""""""""""""""""""""""""""""""""""""" > STReport's Guest Editorial OBSESSIONS CONSUME FASTER THAN FIRE! -------------------------- Cooperation?! At What Price? ============================= by Dana P. Jacobson Over the past few months, and probably much longer, there has been a cloud of animosity between a some at Atari and STReport. Most of that bitterness has been because STReport does not ignore the darker issues with regard to Atari. STReport does, and will continue to do so, report on more than just the issues that some at Atari want to see publicized. Most of our readers have come to rely on STReport's independent reporting and editorializing; and as long as our readership maintains that desire, so shall STReport. Predictably, certain Atari personnel will cringe when they read some of the items contained within these pages from time to time. But also, there are many items within each and every issue that show Atari in an extremely favorable light. STReport does _not_ seek out negative information for the purpose of antagonizing a select few at Atari or, their supporters. But, news does come our way from time to time that does contain differing viewpoints. Should STReport ignore that information? Should STReport present only information and news pertaining to Atari that maintains an upbeat appearance? ...Of course not. There's been a continued onslaught of emotion filled "debate" on the FNET recently between STReport and Z*NET supporters. Competition is one thing, but the abusive hatred this editor has seen propels the situation well beyond competitiveness. Competition is a good thing. It forces each of us to improve ourselves. Both STReport and Z*NET are needed in today's current market. Both magazines are important because each provides a different perspective. On the FNET, it is more than just apparent that a large majority of instigation for the "friction" between STR & ZNET is emanating from one major source. (Not either editor) To purposely pit STReport and Z*NET at loggerheads is a totally non-productive, senseless obsession. It will serve no useful purpose to all parties concerned and especially those 'very special' few at Atari. There's an on-again, off-again attempt to smooth out differences between the publishers of both magazines. Will there ever be a total "truce" between the two? Hopefully there will be, but not with outside instigators using one magazine as a platform to belittle others. Naturally, there will always be those occurrences when each magazine takes a stand completely opposite that of the other. But that too is fully expected and its a very healthy situation that will only benefit the userbase. One side effect that does present a serious problem is obvious favoritism. To the best of our knowledge, no other Atari publication, whether it be Atari's own, Atari Explorer or an online magazine, receives special consideration directed at Z*NET. Playing favorites is not something new in our society; it happens all the time. That fact simply does not make it correct by any measure. Its true, Z*NET has earned many of the "rewards" granted them. But (there's always a but!) for some of Atari's personnel to blatantly throw that favoritism in the face of other support-media is totally unprofessional and absolutely uncalled for. Last week, STReport carried the account of how Atari will be unveiling their new machine(s) at an upcoming Boston Computer Society general membership meeting. This is a major news event, as any new product announcement is. The article related how this editor provided certain information which expedited Mr. R.G. Brodie's contact with the BCS. What started as a casual conversation (Mr. R.G. Brodie had promised to send out the recent issues of Atari Explorer and Atari Artist and lost my address). I then brought up a cryptic message Mr. R.G. Brodie left on Delphi months earlier about a "major event" to be held in Boston in early '92. Mr. R.G. Brodie finally elaborated some details about the BCS meeting; and that he was in the process of contacting the president of the BCS to set up a "meeting" with Atari in attendance. Knowing that the BCS was currently leader-less, I offered Mr. R.G. Brodie a contact which would make things easier for him. This was not something done with the hopes of getting something in return. It just came out naturally. After all its only the right thing to do. Most people, having the same information, would have done exactly the same thing. It is a coincidence that I'm a staff editor for STReport; and that the contact that I provided for Mr. R.G. Brodie is an occasional contributing correspondent. Neither of us, at the time, acted as STReport staff, but as Atari users/supporters. Anyway, the date, etc. has been set for the unveiling, and I've heard little else since this conversation other than the interview providing STReport with the article last week. To the best of our knowledge (we haven't heard to the contrary), only STReport and Z*NET has reported this show; and only Z*NET has been provided any specific details from Mr. R.G. Brodie, initiated by Mr. R.G. Brodie. See any specific pattern here yet? It's still fairly early to start inquiring of Mr. R.G. Brodie concerning details of this upcoming meeting. Specifics are probably still somewhat sketchy, so no one from STReport has called or been called by Mr. R.G. Brodie. Since Mr. R.G. Brodie is still signing his messages with his title of "Director of Communications", it would appear logical that FORMAL PRESS RELEASES would be forthcoming for ALL media and in a timely fashion. Well, favoritism raised its ugly head once again. Apparently, Mr. R.G. Brodie feels that he must blatantly show his obsession with STReport by posting _public_ messages in the FNET and offering Z*NET staff almost total access to the events of this upcoming meeting, and more. Below, you'll see what I mean. These are two messages that are posted, in public, to Ron Kovacs of Z*NET. I sincerely apologize to Ron for including comments contained in these messages pertaining to his grandmother's ill-health. My sincere best wishes for her speedy recovery. I included everything verbatim so that I would not be accused of doctoring the messages in any way. Conf : Z*Net Msg# : 8092/8101 Lines: Extended Read: 4 Sent : Feb 09, 1992 at 9:00 PM To : Ron Kovacs From : Bob Brodie at Fnet Node 706, Z*Net Golden Gate - California Subj : Boston Meeting Ron, On April 22, 1992 we will be unveiling a new machine at the general meeting of the Boston Computer Society. I would like to let me know what arrangements I need to take care of in order to have both you and a couple of your staff members there. I expect to be hosting a pre-meeting dinner 0for the computer media. We would be honored if you and your staff would attend, naturally we'll be picking up the tab for the evening. Ideally, I'd like it if both you and John Nagy could attend. I've also heard that Jon Clarke might be in the US at that time. Of course, Jon would be welcome as well. From what the Boston Computer Society tells me, we can expect between 600-700 people to be in attendance at this meeting. Many of the members of the Boston Computer Society are well known experts in computing, others are famous for their writings, like Stewart Alsop, editor of InfoWorld Magazine. Of course, we need to impress people like this with the new computer that we'll be unveiling. But we will not forget the loyal Atarians that have stood by us through the years, either. So let's start planning a schedule. I want to be sure that you have sufficent access to key Atari staff at this function (or well in advance of it) so that you can be certain to have accurate information. (Richard Miller, VP of Technology and Leonard Tramiel will be there the day before, we can probably arrange a luncheon interview for you) With that thought in mind, I'll be faxing you a non-disclosure agreement tomorrow. Please sign it, and fax it back to me ASAP for my files. Review units will be made available shortly after the meeting, but I believe that there will be one available at the meeting that you will be able to have on an extended loan. Our typical loan agreement will apply. I expect that we'll be staying at the Park Place Hotel in Boston, and we'll be happy to have you as our guest there as well. Just be sure to give me an idea of what type of accomidations you'll require. Boston is a bit pricey, but the Park Place is just a short walk from New England Hall, where the presentation will be made. I have a favorite resturant there as well! I expect that there will be a post-meeting gathering there, and Atari would like you to attend that as our guest as well. I will be sending out annoucements to other members of the Atari specific media as well, but wanted to be sure to let you know first how much we appreciate your support. I look forward to seeing you in Boston! Director of Communications Atari Computer Corporation Conf : Z*Net Msg# : 8188/8189 Lines: Extended Read: 1 Sent : Feb 10, 1992 at 10:37 PM To : Ron Kovacs From : Bob Brodie at Fnet Node 706, Z*Net Golden Gate - California Subj : Re: <8144> Boston Meeting In reply to: - With ALL of the personal problems I am having at the present time, a - short vacation would be welcomed. I will let you know more and - appreciate you offer. Thanks again! - - Talk to you soon! - Ron I hope that your Grandmother isn't any worse...I know that has been weighing on you greatly in the past few weeks. We'd love to have you attend the Boston meeting. As soon as the non-disclosure agreement is signed, we'll start providing you with the details that you need to write an ACCURATE assesment of the new computer(s) that we'll be showing in Boston. I will do everything possible to ensure you the best possible information on this matter, including making high level design staff available to you for interviews. This is just our way of saying THANK YOU for all of your superb support!!! Director of Communications Atari Computer Corporation now, to continue... Now, it's obvious here that these messages are an attempt to belittle and do harm to STReport and support Z*NET for being the "ever.. so cooperative" medium. Truly, these messages are the type that were meant to be discussed by phone. On top of which, who ever heard of having the press sign "non-disclosure" agreements?? By allowing STReport staff and readers to see them in public can only be viewed as an act of obsessive revenge. A few months ago, Mr. R.G. Brodie told Ralph Mariano that cooperation from STReport (i.e. Ralph) was a prerequisite to cooperation from Atari (i.e. Mr. R.G. Brodie). Roughly translated, change your editorial stance and be totally cooperative and so will I. This is not "communications", it's a directive, an ultimatum. Corporations do _not_ dictate to the media what to print and what editorial stance to take on certain issues. They provide information, as much as humanly possible, and look forward in hopes the information will result in positive, supportive stories. Each involved member of the media will make their own judgments and act accordingly. To ignore one publication while fawning and fussing over another most certainly cannot and will not have a positive reaction. Yet, these situations continue to occur for all to see... Apparently, these above messages are some sort of immature 'payback' directed toward Ralph, STReport and its staff. In reality, please think of the impression made upon editors like Rod MacDonald, John Jainschigg, Patti & Bill Rayl, or Joe Waters? Not to mention the users in general! I wouldn't call a publication such as ST Informer "the opposition"; and Atari Explorer is Atari's in-house magazine. By going out of his way to bait and antagonize Ralph and other STReport personnel with his praise of one group of journalists, Mr. R.G. Brodie fully endangers his credibility with all of the rest! Although STReport is not a full, commercial venture, the other aforementioned publications rely upon Atari to make a living. It's obvious that Mr. R.G. Brodie doesn't hold the other magazines in the same light. Yes, Mr. R.G. Brodie did state he'd be sending out announcements to other publications as well. When? Credibility is something that Atari doesn't seem to enjoy having an overwhelming abundance of. Can they can afford to lose even the slightest bit to this fruitless obsession? Regardless of whether or not STReport receives similar treatment, the BCS meeting will be highly attended by STReport staff. Fortunately, my living in Boston will make this easier, as well as other STReport contributors. With the type of cooperation and favorable reporting (because it's warranted, not required) that we do attempt to accomplish, we feel more communication would have already been held. STReport, albeit indirectly, provided some of the steps to initiate this meeting. This cooperation was done with no strings attached. Personally, I did feel that Boston area user groups would hear more. Also, as an editor of STReport and a piece of the puzzle, I feel that I would have received some more information which would enable us to provide a comprehensive report of this important event. Let's hope that Atari, via Mr. R.G. Brodie, decides to have a change of attitude and offers the same cooperation that has been provided them. It's time for Atari to maintain a non-biased cooperative with all of the Atari publications, and let the chips fall as they may. """""""""""""""""""""""""""""""""""""""""""""""" STReport's Staff DEDICATED TO SERVING YOU! ---------------- Publisher - Editor ------------------ Ralph F. Mariano PC DIVISION AMIGA DIVISION MAC DIVISION ----------- -------------- ------------ Roger D. Stevens Charles Hill R. ALBRITTON STReport Staff Editors: ----------------------- Lloyd E. Pulley Sr. Dana P. Jacobson Michael Arthur Lucien Oppler Brad Martin Judith Hamner John Szczepanik Dan Stidham Joseph Mirando Steve Spivey Doyle C. Helms Contributing Correspondents: ---------------------------- Michael Lee Richard Covert John Deegan Brian Converse Oliver Steinmeier Tim Holt Andrew Learner Norman Boucher Harry Steele Ben Hamilton Neil Bradley Eric Jerue Ron Deal Robert Dean Ed Westhusing James Nolan Vernon W. Smith IMPORTANT NOTICE ================ Please, submit letters to the editor, articles, reviews, etc... via E-Mail to: Compuserve.................... 70007,4454 GEnie......................... ST.REPORT Delphi........................ RMARIANO BIX........................... RMARIANO FIDONET....................... 112/35 FNET.......................... NODE 350 NEST.......................... 90:19/350.0 ____________________________________________________________ > STReport CONFIDENTIAL "Rumors Tidbits Predictions Observations Tips" ===================== - Sunnyvale, CA NAMM SHOW PRODUCES SUPER RESULTS! ------------- The level of sales volume, the number of new dealers signed on and of course, the response from the professional entertainment world has been acclaimed the highest, most positive since Atari's acquisition by the Tramiels. By any standard of measure, J. K. Grunke, Corporate Director, International Music Markets, has brought to Atari a level of professionalism, recognition and enthusiasm the likes of which have not been enjoyed in a number of years. This year's show marks a quantum leap in the proper direction for a soundly producing division of Atari's Professional Systems Group. - Jacksonville, FL PORTFOLIO TO STRUT ITS STUFF FOR FUZZ! ---------------- In an upcoming convention, Charles Hill will be demonstrating the power of the Atari Portfolio to the Nation's Police Chiefs. Hill, whose company provides a large segment of the software used throughout the nation's Law Enforcement community, plans to demonstrate the powerful uses the Portfolio can provide to the "cop on the beat". He plans to emphasize the versatility of the Portfolio when used in taking Crime scene reports, Accident Reports and all other memo book entries. The ram cards used with the Portfolio are recognized as ideal for storing pre-prepared forms of all types. Hill also mentioned the graphical capabilities they were interested in, he said they wanted the ability to show suspect's "mugshots" to crime scene witnesses before the real vision faded from their memory. When coupled to the home precinct via telecommunications, the officer could be "patched through" and have the entire "NCIC system" in either his pocket or the compartment in his clip board. ____________________________________________________ > STR Mail Call "...a place for the readers to be heard" ============= STReport's MailBag ================== From Delphi... J35957 14-FEB 00:36 General Information RE: Gregg Pratt Resignation (Re: Msg 35929) From: SMHALLACK To: BOBBRO (NR) Not to disturb you or anything, but I am still blitterless. I don't know what to say... I am really frustrated about this. I do understand that you are a busy person, but I believe that if you made an effort you could mail a blitter to me. I have sent private e-mail with my address to you and have never recieved a reply! Do you realize that it has been nearly a year now since you told me that you would send one out? I have been using Atari computers now for over 11 years, and this is the first time that I have questioned whether I should have bought one or not. Editor Note; Michael Hallack has had a defective Blitter Chip in his 1040 STe from the day he bought it. Over a year ago, he was promised a replacement. From GEnie.... Category 4, Topic 11 Message 173 Fri Feb 07, 1992 A.DEFFENDERF [ALAN] at 22:54 EST Jim, I need some help out of a jam. The guy who is installing my T20 needs to know what to do with those funky blue trace wires that came out stock with my Mega 4. You see, in the process of jerking out a stupid boot delay gizmo on the motherboard these four or five little blue wires got yanked too. I believe all of them were connected to the 68000 and to a little chip near the edge of the board. I need to know where they connect on the 68000 and on the other chip. I've posted a message on the Atari Corp catagory. I thought since you must have installed hundreds of T2X's that you might be familiar with these nasty blue wires. I would reaaly appreciate your help... thanks, Alan Deffenderfer BTW: I think both Dave Small and Jim Allen have produced excellent products for the ST/TT market. I am really satisfied with Jim's T2X's and with Dave's GCR. The speed and the emulation at 'low' costs are what keeps me with Atari. All the bickering back and forth just shows that both Dave and Jim....and you too George....are really concerned for 1) the customer 2) their products 3) Atari. We all wake up human every morning and we all we have our own perspectives and biases. Whether we kill each other because of them is our choice, but I think the disagreements lately just show the hard work and concern for ...no not for... concern by Jim and Dave and George. Wow! And I thought I had enough philosophizing in my Intro to Philosophy class this morning. Whew! If my prof could see this he'd flip. ------------ From CIS Read action ! #: 30936 S2/Games 11-Feb-92 17:44:26 Sb: #30895-#Falcon 3.0 Fm: Spectrum HoloByte 76004,2144 To: Andrew Johnson 70374,2144 Dear Andrew: Unfortunately, we have no plans right now to develop FALCON 3.0 for the Atari ST. There are number of different reasons (including the technical difficulties), but certainly one of them is the dismal ST market. We released Flight of the Intruder late last year, and only sold about 760 in the U.S. Obviously, there's no way we can afford to develop games for such a small market. No.19 From GEnie Category 14, Topic 7 Message 44 Wed Feb 12, 1992 DRAFTERY at 23:01 EST First let me explain that I am a loyal Atari enthusiast. I purchased a ST when they first came out. I have been using it productively and upgrading it ever since. Last year I purchased a Portfolio and I am very happy with it also - I am typing this message on my Portfolio. I also am a shareholder of Atari stock so I have an additional financial incentive to see Atari do well. I am not involved with Go Corporation, developers of PenPoint; I just think it is a great idea. I believe that Atari should license PenPoint for use on the ST Pad instead of using TOS. Atari is following the same route with pen computers that Microsoft is doing. Microsoft has developed Pen Windows as a layer over DOS so they can run existing Windows SW on the future pen based computers. Atari is doing the same with TOS/GEM to use existing ST software. Go Corporation has developed an entirely new OS called PenPoint. It is based on a 32 bit microprocessor. This new OS is object oriented for ease of application development and code reuse; it is an open system which can be added to in the future. Major SW companies including WordPerfect and Lotus have started developing SW for PenPoint. All pen base computers running PenPoint would be able to run these applications. That is why it is so important for Atari to adopt Penpoint and get in on the ground floor of this new technology and way of using computers. It is time for Atari to get into the mainstream; we will never get the major sw companies writing for us if we don't. Let's face it, Lotus and WordPerfect are never going to write SW for the ST Book. The PenPoint OS contains the following built in features: Multitasking Automatic networking (you can plug the computer into a network at any time and PenPoint will automatically send Faxes and E-mail, as well as receiving any mail which may be in your mailbox) High resolution display which adapts to any screen size Outline based fonts which can be any point size Handwriting (printing) recognition engine Virtual Keyboard which can be popped up to enter text Object oriented approach Hypertext linking capability within any application Applications can be imbedded within each other (you can be typing a letter in a wordprocessor and start a spreadsheet or drawing application and put the spreadsheet or drawing within the letter. No more importing of graphics from one program to another is required.) Support of pen gestures to control user interface Notebook User Interface with active icons I believe most people have the following misconception about the use of pen based computers: that all data will be entered and manipulated with a stylus. For the vast majority of computer literate people nothing could be further from the truth. Most data entry into a pen computer will be by means of a conventional keyboard, since most people can type at least as fast as they can print. If Atari doesn't have a port for an external keyboard on the ST Pad, then they better get one fast even if it means using the serial port to plug into. The stylus will be used when you are travelling in a car or standing on the factory floor or by people who can't type and are scared of computers. There have also been comments that handwriting recognition must be 100%; people are worried about printing DIR and having the OS translate it as DEL. This can't happen with PenPoint. To delete an object be it a word or a document, you draw an X thru the object. To get a directory, you look at the first page of the Notebook User Interface and you see a table of contents (directory). The PenPoint handwriting recognition module uses a built-in spell checker to correct the majority of its errors. Imagine, an OS with a built-in spell checker! Those interested in learning more about pen based computers should read the following articles: BYTE February 1991 pg 211-221 PC/COMPUTING November 1991 pg 215-228 PC WORLD March 1991 pg 83-86 Dr. DOBB's Journal November 1991 pg 14-28, December 1991 pg 107-113 PC MAGAZINE January 14, 1992 pg 415-418 I think Atari should treat the ST Book as interim product, which can run all ST software. The ST Book is roughly the same size as the ST Pad, so it can be used as a powerfull computer to take with you on the road and by the music community. Atari should take the necessary time to make sure the ST Pad makes full use of a pen based computer's capabilities: this means running PenPoint. I have waited for a Hypercard like application for the ST for a long time. With the arrival of Hyperlink, we at last have a hypermedia product for our favorite computer. But if the st pad runs PenPoint, it will have a hypermedia system built into the OS and available in any application. This is the best way for Atari to go with the ST Pad. Dave Raftery ------------ > A "Quotable Quote" "....a sign of the times" ================== "REWARD YOUR FAITHFUL WITH A HEAVY, HEARTLESS HAND!" ....MARQUIS DE SADE """"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""" > ABCO SPECIALS! STR InfoFile * NEW 1992 Prices! MORE Products! * =========================== -------------------------------- ** EFFECTIVE IMMEDIATELY! ** NOTICE: ABCO will BEAT OR MATCH * ANY * Advertised or Invoiced price * We will NOT be undersold! ABCO COMPUTER CONSULTANTS P.O. Box 6672 Jacksonville, Florida 32236-6672 Est. 1985 _________________________________________ Voice: 904-783-3319 10 AM - 4 PM EDT BBS: 904-786-4176 12-24-96 HST FAX: 904-783-3319 12 PM - 6 AM EDT _________________________________________ HARD DISK SYSTEMS TO FIT EVERY BUDGET _________________________________________ All systems are complete and ready to use, included at NO EXTRA COST are clock/calendar and cooling blower(s). *-ALL ABCO HARD DISK SYSTEMS ARE FULLY EXPANDABLE-* (you are NOT limited to two drives) (all cables and connectors installed) - Available for all Platforms - * ICD HOST ADAPTERS USED EXCLUSIVELY * OMTI HIGH SPEED CONTROLLERS * * ICD ADSCSI+ HOST ADAPTERS * FULL SCSI COMMAND SET SUPPORTED * * SCSI EMBEDDED CONTROLLER MECHANISMS * -- QUANTUM: THE "ROLLS ROYCE" OF HARD DRIVES -- WE PAY SHIPPING & INSURANCE!!! >UPS!< (Cont. USA) Deluxe 2 bay Cabinet w/65w auto-switching PS TIME PROVEN to be the most reliable! Model Description Autopark Price ================================================== SGN4951 51Mb 3.5" Y 439.00 SGN6277 65Mb 5.25" Y 469.00 SGN1096 85Mb 5.25" Y 549.00 SQN1055 105mb 3.5" Y 599.95 SQN2055 170Mb 3.5" Y 689.00 SQN3055 240Mb 3.5" Y 939.00 SQN4055 426Mb 3.5" Y 1610.00 ================================================== FULLY ASSEMBLED SCSI DRIVES DEDUCT $60.00 ADD $35.00 for 4 BAY SUPER CABINET w/250+w PS EXOTIC TOWER CABINETS AVAIALABLE Call for Info! PLEASE NOTE: The above is partial listing only! FULLY ASSEMBLED SCSI DRIVES DEDUCT $60.00 ADD $35.00 for 4 BAY SUPER CABINET w/250+w PS EXOTIC TOWER CABINETS AVAIALABLE Call for Info! PLEASE NOTE: The above is partial listing only! CPU ACCELERATOR & MEMORY UPGRADES AVAILABLE & INSTALLED ***** >> ABCO proudly offers the fabulous 1040 & MEGA STe Computers << Call for ABCO's * VERY SPECIAL * Introductory prices! ATARI COMPUTERS * STILL THE BEST VALUE! ***** If you don't see what you want listed here, call us. Odds are, we either have it or, can get it for you! * GUARANTEED * AT THE BEST POSSIBLE PRICE! ** 800-562-4037 ** "WE SERVICE WHAT WE SELL" ****** SPECIAL - SPECIAL ****** * SYQUEST 44MB (#555) >> ABCOFILE "44" << REMOVABLE MEDIA DRIVE * - SYQUEST 44 MB DRIVE - ICD ST ADSCSI PLUS H/A - ICD Utility Software - 3' DMA Cable - Fan & Clock - Multi-Unit Power Supply (1) 44 MB Syquest Cart. --->> SPECIAL! NOW ONLY __$ 645.00__ <<--- **** SCSI UNITS -> ONLY $549.00 **** WE PAY SHIPPING & INSURANCE! >UPS!< (Cont. USA) COMPLETELY ASSEMBLED AND READY TO RUN! Cart and Utility Software Included! EXTRA CARTS: $ 69.50 DRIVE MECH ONLY: $ 339.95 ****** SPECIAL - SPECIAL ****** * TWIN SYQUEST 44MB REMOVABLE MEDIA DRIVES ... PROGRAMMER'S DELIGHT * SPECIALLY PRICED ** $995.95.00 ** Includes: * TWO * cartridges! * SYQUEST 44MB REMOVABLE MEDIA DRIVE AND HARD DRIVE COMBINATIONS * - Syquest 44 Model  and the following hard drives - ** 50mb SQG51S $789.00 105mb SQG105S $989.00 ** Or, YOUR choice of Hard Disk Mechanism! LOWBOY - STANDARD - DUAL BLOWER CABINETS CUSTOM CONFIGURATIONS AVAILABLE ** ANNOUNCING THE NEW! -> ABCO CD-ROM! ** :Special Introductory offer: ABCO CD-ROM $389.95 (limited time only) Listed above are a sampling of the systems available. Prices also reflect various cabinet/power supply configurations (over sixty configurations are available, flexibility is unlimited) * IBM - MSDOS - AMIGA - ATARI - APPLE - MACINTOSH * ALL UNITS COMPATIBLE WITH --> SUPERCHARGER - AT/PC SPEED - GCR LARGER units are available - (Custom Configurations) *>> NO REPACKS OR REFURBS USED! <<* - Custom Walnut WOODEN Cabinets - TOWER - AT - XT Cabinets - Atari SLM 804, SLM 804PCV Laser Toner Kits Memorex 2108, 5287 Oasys Laserpro 5287, 5308, Express 830, Express Series II Silver Express, Gold Express ** $41.95 shipping Included ** Atari SLM 605 Laser Toner Kits AT&T 593, CAF Laser, DSI Laser, DTP Systems, Epson EPL-6000 Facit P6060, Fontx Syslaser, Harris3M 2006, M-Tally MT905 Microtek Turbo PS, OAS Laserpro Executive, Packard Bell 9500 TEC LB 1305, Toshiba PageLaser 6 ** $41.95 shipping included ** (TWO Toner Carts Incl.) Panasonic Laser Toner Kits Panasonic KX -P 400 series, Panafax UF-750 Facimile ** $41.95 shipping included ** -- ALL TONER KITS * IN STOCK * -- * Toner Starter Kits-$62.95 * * Replacement (804) Drums-$186.95 * ABCO's Replacement Toner Advantages =================================== >> MANY other ATARI related products STOCKED << ALL POWER SUPPLIES UL APPROVED -* 12 month FULL Guarantee *- (A FULL YEAR of COVERAGE) WE PAY SHIPPING & INSURANCE! >UPS!< (Cont. USA) QUANTITY & USERGROUP DISCOUNTS AVAILABLE! _________________________________________ DEALERS and DISTRIBUTORS WANTED! please, call for details Personal and Company Checks are accepted. ORDER YOUR NEW UNIT TODAY! CALL: 1-800-562-4037 -=**=- CALL: 1-904-783-3319 Customer Orders ONLY Customer Service 9am - 8pm EDT Tues thru Sat ABCO is EXPANDING!! CALL FOR INFORMATION! SEND FOR YOUR NEW ABCO CATALOG TODAY! """""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""" STReport International Online Magazine Available through more than 10,000 Private BBS systems WorldWide! """""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""" STReport "YOUR INDEPENDENT NEWS SOURCE" February 14, 1992 16/32bit Magazine copyright 1987-92 No.8.07 """""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""" Views, Opinions and Articles Presented herein are not necessarily those of the editors/staff, PCReport, STReport, AMReport, MCReport. Permission to reprint articles is hereby granted, unless otherwise noted. Each reprint must include the name of the publication, date, issue # and the author's name. The entire publication and/or portions therein may not be edited in any way without prior written permission. The entire contents, at the time of publication, are believed to be reasonably accurate. The editors, contributors and/or staff are not responsible for the use/misuse of infor- mation contained herein or the results obtained therefrom. """"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""